Wheel Fitment & Question Thread

[ryansmith]

Any suggestions on offsets for going 17x9 all round?
I dont really want to have to roll or pull the guards

Thinking 17x9 +20 or 25 all round?

 

[san supra]

I have 2004 mustang cobra r 18x9 wheels with 245/40/18 tires all around
Im putting them on my 91 supra that has NO FENDER ROLLING...yet

I NEED NEW TIRES
im thinking 265/40/18 in the rear

QUESTION: what will fit in my front?
tokico/ eibach suspention set up right now

 

[JB91389]

Front 18x9.5
Rear Size : 18x10.5
Front Offset : +30
Rear Offset : +30

Fit?

Rear fenders rolled.

Or would this be better?
18x8.5 +25
18x9.5 + 30

 

[K_SHAN]

I'm thinking.. 18x10.5+13 and 18x12+32 CCW LM20s what do you think rodel? fronts would probably need redone to fit. maybe rears to

 

[BorHor]

Any suggestions on offsets for going 17x9 all round?
I dont really want to have to roll or pull the guards

Thinking 17x9 +20 or 25 all round?

If you don't want to do any fender work you may have to go higher offset.

I have 2004 mustang cobra r 18x9 wheels with 245/40/18 tires all around
Im putting them on my 91 supra that has NO FENDER ROLLING...yet

I NEED NEW TIRES
im thinking 265/40/18 in the rear

QUESTION: what will fit in my front?
tokico/ eibach suspention set up right now

Depends on the offset.

Front 18x9.5
Rear Size : 18x10.5
Front Offset : +30
Rear Offset : +30

Fit?

Rear fenders rolled.

Or would this be better?
18x8.5 +25
18x9.5 + 30

Depends on if you are willing to roll the fenders in front and rear. 9.5 10.5 won't take too much work tough.

I'm thinking.. 18x10.5+13 and 18x12+32 CCW LM20s what do you think rodel? fronts would probably need redone to fit. maybe rears to

fronts can work with a nice stretch and fender work. Rears actually aren't too bad. Right now I have a car running 19x11.5 +33 with 295 tires. I did have to pull the rears a bit though.

 

[BorHor]

If I did my math right, a set of 16 x 8 +18 on all four would fit about the same, right?
I'm sure this seems like an odd size but I am thinking of picking up a set of Starion/Conquest wheels (if I can find them)

If you search around you can find pictures of people that have ran those wheels before.

 

[rtrdpenguin]

For reference,

I now have 17x10 +20 wheels on all 4 corners with 295/35/r17 tires

Pulled fenders at least 1" in the front and 1/2" in the rear, -1.7 deg camber F and -3 deg camber R for now. More pull in the rear is definitely needed for the -1.5 degrees I'm shooting for. Ride height is relatively low but not crazy.

Everything clears, even steering wise. I have additional steering angle from stock and at full lock barely clear the lower a-arm on the rear side (probably like 1/16" of clearance) so I put in some steering stoppers just in case haha.

Terrible picture, but it's all I have for now:

 

[xzeror]

^ Please get better pics, looks good man! Looking forward to some better pics . What kind of wheels are those?


For a set of 17 inch rims, sizes are front 9" +20, rear 10" +30. What size tires do you guys recommend? I was thinking of 245/45, 275/40. I want an aggresive stance/fit. If u guys have other recomendations feel free to post .

Also what kind of fender work would i be looking at?

 

[K_SHAN]

any Idea on offset to fit a 11 with a 315? some where in the 38 range? I'd like to not do much pulling or have any camber for the most part...

 

[lithium14]

38 with a 11in wide wheel??? curses... and here I am looking at a 18x10 +38 for my rears... only size offered by Work for the XD-9s. I was hoping it would be flush.

 

[BorHor]

any Idea on offset to fit a 11 with a 315? some where in the 38 range? I'd like to not do much pulling or have any camber for the most part...

No way a 315 will fit with no fender work. I have a car running 11.5 +33 with a 295 with a slight pull and it is sill kinda rubbing. Inside is pretty close to the shock too.

38 with a 11in wide wheel??? curses... and here I am looking at a 18x10 +38 for my rears... only size offered by Work for the XD-9s. I was hoping it would be flush.

It should look pretty good.

 

[RogueCustoms]

Click here to view the original image of 640x480px.

I'm sure this question has been already asked. But I would love to know what wheels are on the Soapra??

 

[BorHor]

I'm sure this question has been already asked. But I would love to know what wheels are on the Soapra??

Pic didn't show up but if they are the ones with the gold face they are Volk GT-C

 

[K_SHAN]

19x9.5 245s fronts +22
19x10.5 305s rears +22

100% Stock fenders

 

[Turbo Habanero]

Dreaming of 305's

 

[K_SHAN]

they poke a little over a 1/4inch.. with the 305's if I stepped down to a 295 and roll the fenders I think they will be money. or even roll/pull with 305.

 

[sylquebec]

19x9.5 245s fronts +22
19x10.5 305s rears +22

100% Stock fenders



]

yes, but they do not fit...

 

[JeffTheJerk]

Godspeed Omega Deep

Which would fit better or at all? And if so does anyone have pictures of these on a MK3? 18x10 with +22 or +40 rear and 18x9 with +24 or +30 front

 

[K_SHAN]

Dat ASS volk TE37s

19x9.5 +22 (245/30/19)
19x10.5 +22 (305/25/19)

I have only rolled/ slight pull on the rear left so far..

100% stock fenders at this point..

I think they fit fine with the roll/pull

 

[slowmedown]

^baller