N
NDBoost
Guest
Alright posting this for a friend since he hasnt done it yet. Current Mods are:
3" Downpipe
60-1 Turbo
Stock BOV
Stock Boost
Apexi Power Intake
5spd
Basically the turbo takes forever to spool, and before it spools you can feel the car chugging until it hits full boost (approx 4.5k). The car also feels like it has absolutely NO balls on the low end, even once it hits boost it doesnt feel like it should. We replaced all intake side gaskets and checked all the IC hoses. Timing is set to 10 degrees, new NGK Platinum plugs & NGK wires. Checked the gaskets for the turbo and their all there and in good shape. TPS has not been fully set but has been "set" to the general proper setting. No codes, and the o2 sensor is in working condition, came out of a working supra.
However the car sputters ALOT when you let off the gas and just let it fall down through the RPM range. Vehicle could be running rich but we dont know for sure.
Anyone got any ideas?
3" Downpipe
60-1 Turbo
Stock BOV
Stock Boost
Apexi Power Intake
5spd
Basically the turbo takes forever to spool, and before it spools you can feel the car chugging until it hits full boost (approx 4.5k). The car also feels like it has absolutely NO balls on the low end, even once it hits boost it doesnt feel like it should. We replaced all intake side gaskets and checked all the IC hoses. Timing is set to 10 degrees, new NGK Platinum plugs & NGK wires. Checked the gaskets for the turbo and their all there and in good shape. TPS has not been fully set but has been "set" to the general proper setting. No codes, and the o2 sensor is in working condition, came out of a working supra.
However the car sputters ALOT when you let off the gas and just let it fall down through the RPM range. Vehicle could be running rich but we dont know for sure.
Anyone got any ideas?