Sheedy Built Supra
- Thread starter sheedy126
- Start date
Any clue on what rim brand or rim code it is?
Appreciated
Also just curious on the compound he choose
Appreciated
Also just curious on the compound he choose
nope haha, he is a friend of mine that i used to live by in Finley before i moved into town
he's been really helpful with my engine build and other tips and tricks
thanks!
soon it will be getting a half cage with 1.5x.95 hrew tubing, new tires and some new wheels. im thinking a set of the saleen replica wheels
he's been really helpful with my engine build and other tips and tricks
thanks!
soon it will be getting a half cage with 1.5x.95 hrew tubing, new tires and some new wheels. im thinking a set of the saleen replica wheels
Got a little done today before work, my sillicone adapter came in so I can finally run my aem dryflow airfilter and get rid of that hks knock off filter
As well as rewiring my wideband to maft pro unit, had it backwards before
Sent from my PC36100 using Tapatalk 2
As well as rewiring my wideband to maft pro unit, had it backwards before
Sent from my PC36100 using Tapatalk 2
been a little since i made a post so i thought id post some progress. cars running great with kennys tune and put down 310rwhp and 337 rwtqr at 10 lbs. i was pretty impressed, ill post up the dyno pic once i get it uploaded to photobucket again.
also picked up this holset turbo from a friend of mine, actually he gave it to me. i believe its an HX35w but im not 100%sure, the tag was pulled off the compressor housing.
either way it will need a complete center section which i can pick up cheap on the cummins forum.
next on the list to get is a t3 header, vband downpipe, and some modding to the intercooler lines
also picked up this holset turbo from a friend of mine, actually he gave it to me. i believe its an HX35w but im not 100%sure, the tag was pulled off the compressor housing.
either way it will need a complete center section which i can pick up cheap on the cummins forum.
next on the list to get is a t3 header, vband downpipe, and some modding to the intercooler lines
Last edited:
just uploaded the dyno sheet, had my boost controller gain setting wrong making my wastegate fluctuate a bit at the end. (10 Lbs)
im hoping to shoot for the 375-400 range with this new turbo, maybe more?
Scored a t4 Header for 50$ on the forum here and a buddy of mine gave me a 3" vband downpipe earlier today for helping him hook up his car stereo!
new gaskets are on the way as well as some AN fittings and SS oil lines for the new turbo setup
im hoping to shoot for the 375-400 range with this new turbo, maybe more?
Scored a t4 Header for 50$ on the forum here and a buddy of mine gave me a 3" vband downpipe earlier today for helping him hook up his car stereo!
new gaskets are on the way as well as some AN fittings and SS oil lines for the new turbo setup
Last edited:
got a few more parts in today, just need a couple more flanges for the downpipe and i should be able to throw the new hx35 on there soon!
hks style wastegate from drift motion along with a turbosmart 14psi spring. Aaron said being longer than the hks one it should be around 16psi
some new oil lines and AN fittings for a easier turbo install
along with a t4 and t3 flange so i can my my own adapter from the t4 header to t3 turbo since the header i have sits the turbo back in the engine bay further than id like it to
o2/wideband weld in flanges for the new downpipe
more updates to come soon!
hks style wastegate from drift motion along with a turbosmart 14psi spring. Aaron said being longer than the hks one it should be around 16psi
some new oil lines and AN fittings for a easier turbo install
along with a t4 and t3 flange so i can my my own adapter from the t4 header to t3 turbo since the header i have sits the turbo back in the engine bay further than id like it to
o2/wideband weld in flanges for the new downpipe
more updates to come soon!
