pics of stock vs. 57 trim ct26

[forcefedsupra]

I just thought people thinking of upgrading their turbos might want to see the difference between stock and the 57 trim. This was done by Driftmotion.

 

[supra1642]

nice picture comparison this will come in handy for someone.

 

[GrimJack]

For reference, here's the same thing with a stocker and a 60-1.

 

[RiyadYar]

so what exactly is the difference? do they just change the size of the opening?is the turbine changed?

 

[arod]

I have a 60-1 T04 P trim Garret with ct26 housings and the compressor and turbine wheels are bigger also the compressor inlet and turbine outlet.


.

 

[TooGoode]

so what exactly is the difference? do they just change the size of the opening?is the turbine changed?

:nono:

 

[bryanintexas]

Good stuff! It's always nice to see them side-by-side to get a comparison. Makes me want my .57 trim that much more!!!

 

[forcefedsupra]

so what exactly is the difference? do they just change the size of the opening?is the turbine changed?

The turbines are bigger, front and back. I can take a pic of the back if anyone wants it.

Someone used to make steel braided oil lines for the ct, does anyone still make that?

 

[forcefedsupra]

Someone used to make steel braided oil lines for the ct, does anyone still make that?

Nevermind, I found it.

 

[rumptis]

I'm not 100% sure as I'm waiting for mine to come back but I don't think the exhaust turbine is touched unless you get it cliped.

Its just the compressor side that is changed and the housing bored out. Basically everything you see different in the pictures above.

 

[7MsuprO]

I'm not 100% sure as I'm waiting for mine to come back but I don't think the exhaust turbine is touched unless you get it cliped.

Its just the compressor side that is changed and the housing bored out. Basically everything you see different in the pictures above.

Correct.

 

[forcefedsupra]

Here's the back.

 

[Rennat]

How do they clean the exhaust baldes??? Do they bead blast it?

 

[marc3]

i also noticed that the vacuum port for the wastegate is at a different place.
any reason why?

 

[Rennat]

they did for a boost controller most likely. would make doing it a lot easier.

 

[Nick M]

i also noticed that the vacuum port for the wastegate is at a different place.
any reason why?

For the 89 model year, Toyota redid the actuator and set up for faster spool.

 

[Sawbladz]

For the 89 model year, Toyota redid the actuator and set up for faster spool.

Which one is the 89? I've had a few Ct's on my car and I forget what my original looked like.

 

[Rennat]

For the 89 model year, Toyota redid the actuator and set up for faster spool.

really? any "hard facts" to support this??? Just curious is all...

 

[buldozr]

Old and Busted, New Hottness(respectively)
very good pictures. The ct26 can be worked to get some good numbers but nothing too crazy. Basic mods will make for a very street worthy car.

 

[Nick M]

really? any "hard facts" to support this??? Just curious is all...

Yeah, how about the pictures you just looked at. :nono: Or was the TSB and commercial publications...