anybody close to the cleveland/lorain area feel like helping install BC 264's and retune my AFC NEO while im home in a couple weeks? lol
OHIO thread
- Thread starter wornoutsupra
- Start date
Anyone looking for some rims, I need to unload mine so I can buy tires for my new ones
17x8 +25 front
17x9 +20 rear
600 for rims and new tires, I might also throw in my 17mm bolt on spacers if you want them.
17x8 +25 front
17x9 +20 rear
600 for rims and new tires, I might also throw in my 17mm bolt on spacers if you want them.
I have seen that one to, but no clue who owns it.
The rims are xxr 006and the tires are 235/45R17 rear and 225/45/R17 front, they are nankangs brand new and still have the stickers on them. They are just on my car so I don't have to put it on jack stands right now.
front
and I dont have a rear pic, but it looks the same with a little bigger lip.
The rims are xxr 006and the tires are 235/45R17 rear and 225/45/R17 front, they are nankangs brand new and still have the stickers on them. They are just on my car so I don't have to put it on jack stands right now.
front
and I dont have a rear pic, but it looks the same with a little bigger lip.
greek i still have a bunch of 7mgte parts left over
like hoses, sensors etc...
txt me what you need
740-974-0272
like hoses, sensors etc...
txt me what you need
740-974-0272
i just talked to the guys at Accelerated Performance, theyre going to dyno tune my car while im home on leave 
first im installing those BC 264's and replacing my plain bic 3" dp with the bic 3" ddp i have, along with a test pipe and hks (i think?) hyper dragger exhaust. whatever brand the exhaust is, its 3.5". hoping to see figures close to 500 for both hp and torque. if anybody wants to buy my old exhaust let me know, ill be stateside in like 2-3 days.
first im installing those BC 264's and replacing my plain bic 3" dp with the bic 3" ddp i have, along with a test pipe and hks (i think?) hyper dragger exhaust. whatever brand the exhaust is, its 3.5". hoping to see figures close to 500 for both hp and torque. if anybody wants to buy my old exhaust let me know, ill be stateside in like 2-3 days.jonahs_supra;1795454 said:
I'll keep it in mind, I know I need a shit ton of stuff.
Where would I be able to get the correct bolts for everything? I hate having mismatched bolts all over the motor. Since I'm doing a rebuild I might as well get everything as correct and good as I can.
YakuzaKirby;1795475 said:i just talked to the guys at Accelerated Performance, theyre going to dyno tune my car while im home on leave
What turbo??
Greek;1795347 said:
Thats why you ask people like me where to buy a motor from.. I would have told you that place SUCKS!
YakuzaKirby;1795475 said:i just talked to the guys at Accelerated Performance, theyre going to dyno tune my car while im home on leave
What exhaust? I'd like that HKS you have
Greek;1795615 said:
You spelt UZ wrong
Mk3*Supra;1795681 said:
I'm pretty sure the only reason why Shane ordered from Tiger is because it was the only place with a GTE in stock. Since I needed it with the quickness that's how it happened.
And lol'd. Performance market for GM > UZ. That's what it comes down to. Plus a carbed 350 is stupid simple and reliable.
the turbo on my car is a Lipp T04E 61mm, it made 483whp and 411 ft/lbs before on 22psi with 50/50 93 octane and cam2 110. that was totally stock internals with a cat. with the bigger exhaust, cams, and straight cam2 im hoping to keep hp numbers similar but raise my torque a lot and at a lower boost level.
-Mk3*Supra- the exhaust im installing is an older HKS i think (not entirely sure. bought it 4 years ago and havent put it on the car) the exhaust currently on the car whick ill be selling is a 3" custom made exhaust with a magnaflow muffler thats 3" in 3" out, its got a black 3" angle cut tip. really sleeper. but im kinda over my whole sleeper thing.
-Mk3*Supra- the exhaust im installing is an older HKS i think (not entirely sure. bought it 4 years ago and havent put it on the car) the exhaust currently on the car whick ill be selling is a 3" custom made exhaust with a magnaflow muffler thats 3" in 3" out, its got a black 3" angle cut tip. really sleeper. but im kinda over my whole sleeper thing.
if anyone is interested theyre welcome to come join in the wrenching or even just show up to check out the exhaust/make an offer or whatever.
im about to be home in a couple days. but i hear the weather sucks so i doubt anybody will want to bring their supras out lol. somebody should plan a meet of some sort for August- thats the next time ill be in ohio.