Ehhhh, kinda odd look. IMO the front of a supra is perfect...its the high ass back bumper that's funny looking to me.
Idea For a Custom Front Bumper Cover
- Thread starter Zer0DeGreeZ
- Start date
Toyota had it right w/ the 86.5-88's. Then they had to go and screw it all up w/ the '89+ cars!
The above picture ruins the lines of the car. It's likely to look the same if you fire a missile at it head-on.
That is, of course, my opinion.
The above picture ruins the lines of the car. It's likely to look the same if you fire a missile at it head-on.
That is, of course, my opinion.
I agree with you about the front end but the rear end looks much better on the 89+.shaeff;1227384 said:Toyota had it right w/ the 86.5-88's. Then they had to go and screw it all up w/ the '89+ cars!
The above picture ruins the lines of the car. It's likely to look the same if you fire a missile at it head-on.
shaeff;1227384 said:Toyota had it right w/ the 86.5-88's. Then they had to go and screw it all up w/ the '89+ cars!
The above picture ruins the lines of the car. It's likely to look the same if you fire a missile at it head-on.
hey did anyboby ever tell you your opinion is wrong, lol!!
has anyone ever (on a pre-89) changed the front turn signals to the post 89 but of course left the bumper the pre-89? I imagine you'd have to take out or make a customs centerpiece, but curious what it looks like.
Zer0
Zer0
I've seen one on here before, it was a red supra. It was posted on a thread comparing the pre 89 with a shaved licence plate and the 89+ with the turbo A duct. I'll poke around and see if I can find it.Zer0DeGreeZ;1228381 said:
RazoE;1228408 said:BLAAAMM!!
Very Nicely Done. However I was thinking the center piece made of CF and the top grille being slightly thinner from left to right and then no grilles filling them, and in the top duct the toyota emblem would be centered. otherwise damn close to what I was thinking but a tad still off.
Zer0
For me, it depends entirely on the car.Canuckrz;1227413 said:
(I actually like the '89+ fronts, too, just not as much as the pre '89)Nope, they were all afraid of getting banned.bmoss85;1227445 said:
LOL, j/k!
Zer0DeGreeZ;1229927 said:
now that I think about it, you lost me. I have no idea what you're talking about, please sketch what you want me to do...
RazoE;1230103 said:
The part that covers over the bumper itself is CF, the rest just fiberglass. look at the front image of the pixel car in my sig, take that and think the new GTR, but instead of extremely curvy like the GTR think more squarish to fit with the rest of the body curves of the car.
Hope This Helps
Last edited:
Oh, okay I see now..
Well the bumper would have to have a frame around it, and stick out, and be part of the header panel...
Well the bumper would have to have a frame around it, and stick out, and be part of the header panel...
not yet, might work on it today once I get home...
I'll have to pop out the signals or recess the header panel, I'm thinking of doing the former, so we'll see what I can whip up..
From your description is pretty much want an Evo X bumper on the MKIII, with a flat abbreviated nose..
I'll have to pop out the signals or recess the header panel, I'm thinking of doing the former, so we'll see what I can whip up..
From your description is pretty much want an Evo X bumper on the MKIII, with a flat abbreviated nose..
RazoE;1232491 said:
an Evo X style bumper yes. but following suite with the types of curves with the rest of the body. think in a sense that "if toyota had designed this as stock, what would it look like". I don't want it to be too greatly modified, or atleast not have the presence like it was greatly modified to get the look.
