Furious But Lazy 7M owner who gave Up.

[stevenr816]

Omgftmfwbbq?

 

[Turbo Habanero]

Anyone know the different sizes and thread pitch for the bolts that hold the transmission to the engine block.

http://store.driftmotion.com/static/i-1jz2jzbellhousingboltset.php

 

[IndigoMKII]

Anyone know the different sizes and thread pitch for the bolts that hold the transmission to the engine block.

http://store.driftmotion.com/static/i-1jz2jzbellhousingboltset.php

Couldn't a dealer tell you the thread pitch?

 

[IJ.]

Going to be 1.25, I'm guessing M10
(not certain for a Jz but most Toyota's are)

 

[Turbo Habanero]

It looks like there's 2 different sized bolts.

 

[IJ.]

What size are the heads?

 

[Turbo Habanero]

What size are the heads?

I don't know my bolts are gone.

I know some are for sure 19mm and I think the others are 17mm

 

[IJ.]

Where did they go?

Doesn't sound right to me that's HUGE!

 

[Turbo Habanero]

Where did they go?

Doesn't sound right to me that's HUGE!

I wish I knew lol ..

I'm missing I think 4 that I know of.
There's 11total or supposed to be including the 2 on the starter.

Let me double check what size socket I used to take the bolts out.

 

[gurley0916]

I wish I knew lol ..

I'm missing I think 4 that I know of.
There's 11total or supposed to be including the 2 on the starter.

Let me double check what size socket I used to take the bolts out.

The top four are 17mm heads and the rest are 14mm heads.

 

[IJ.]

2 on the starter should be M8x1.25 12mm head

If it's like the 7M the Bellhousing to block should be M10x1.25 14mm heads

If it's 17mm head I'd guess M12x 1.25
(thanks Gurley)

Use some Loctite this time... :nono:

 

[gurley0916]

Ya the 1.25 sounds about right Ian.

 

[Turbo Habanero]

2 on the starter should be M8x1.25 12mm head

If it's like the 7M the Bellhousing to block should be M10x1.25 14mm heads

If it's 17mm head I'd guess M12x 1.25
(thanks Gurley)

Use some Loctite this time... :nono:

I was not the one that installed it last time... and Steven said he used Loctite on everything.

George confirmed the whole 17mm and 14mm by going to look at his motor. He said the 17mm was about 2inches in length and the 14mm was 1.5inches

 

[IndigoMKII]

http://www.loctiteproducts.com/p/t_lkr_blue/overview/Loctite-Threadlocker-Blue-242.htm:x:

 

[87supraguy]

Jordan's clutch pedal went completely soft and doesn't seem the clutch I disengaging.. This maybe the reason he's been having issues with 2nd gear in two different transmissions now... Anyone have any ideas?

 

[IndigoMKII]

New master/slave cylinder with new lines?

 

[Albert]

Bench bleed?

 

[87supraguy]

He has a new slave and master. It's meem bled... He says there's no signs of leaking and master is still full of fluid.

 

[Albert]

Throw out bearing/hub assembly bad?

 

[87supraguy]

That would suck cause all that is brand new too.