arizzle's 92 teal project2!

[arizzle]

wanted to tell you your cars currently my desktop background lol

haha nice i wish i had newer pictures!:icon_bigg

I recently tried to get a clutch through CK, and could get no response from him here or from his website. This was shortly after his departure from here. I went with the Action clutch from Driftmotion. It's supposed to hold over 500FT-Lb of torque, but I can't remember the exact number. Price is very nice.

yeha i also emailed CK but nothing also, i no long buy from him cause of his stock! there usually isnt much when i need it!

I may have a clutch for you if you still need one? LMK

pm sent


update, i got a newer NA head locally its soo minty fresh. car right now is put away for storage and im slowly piecing parts so it will keep me busy for the new few months. :icon_bigg

im hoping to get to drive it a little bit more then this year and probably get to do a few track days and street legal nights:evil2:

 

[arizzle]

well thread back from the dead! will post pictures of the latest parts ive gotten.

for a few months just been collecting parts so far ive gotten.

NA head decked/ new valve stems seals.
NRP rings
ARP fly wheel bolts
ARP head studs
HKS 1.2mm MHG
IS300 coil packs
Maft pro/speed/
Used 550RC injectors
LC1 XD1 innovate WB

just needing

gasket kit
bearings
aluminum rad
hoses
6puck clutch(maybe)
titan cam gears

ill get a few pictures up once i get a chance this is just a update of things ive been gathering.

also got a set of NA valve covers which i will be polishing and posting up.

im just hoping to get 400WHP on a stock 7m, which i shouldnt see why not with proper tuning and the turbo i have now.

 

[arizzle]

well heres a few pictures im hoping to pull the motor out on my vacation after a few days of boarding!!

sorry for the crappy cell pictures.

 

[slightly_red_MA70]

Nice polished valve cover :icon_razz

 

[arizzle]

Nice polished valve cover :icon_razz

haha no no thank you!:naughty:

lol itll look different once im done with them. im going to re-polish both. :evil2:

 

[arizzle]

just a few more pictures from what i got to pick up today!

i will get pictures once i start tearing the motor out!

 

[gurley0916]

Got a nice little list of goodies there that your collecting.

 

[tekdeus]

Any idea on the wheel sizes of your turbo? Having a nice solid reliable 400rwhp is pretty sweet to have.

 

[ForcedTorque]

So why are you using N/A valve covers? Going FFIM? I didn't look backwards.

Be sure to have the used injectors flow tested.

 

[arizzle]

Got a nice little list of goodies there that your collecting.

thanks man, yeah want all the parts before i tear everything apart

Any idea on the wheel sizes of your turbo? Having a nice solid reliable 400rwhp is pretty sweet to have.

i still dont know ive been reading that its a 67trim also a s13 silvia layed down 350 at 15psi with this turbo.

so im hoping ill be able to lay 400 with this turbo. :evil2:

So why are you using N/A valve covers? Going FFIM? I didn't look backwards.

Be sure to have the used injectors flow tested.

im going FFIM later on but for now im going NA it'll clean it up a bit with the IS300 coils. just something different.

yeah they been flow tested and also new filters where installed.

 

[arizzle]

well.......

ive decided to scrap the stock 7m build! LOL

i got a smoking deal on a disassembled 7m

- .20 over JE pistons
- H eagle rods
- balanced 7m crank
- clevit bearings

so i will be pulling my motor out as i found a buyer.

also will be picking up the motor in the next couple weeks but will post pictures tonight if i have a chance!

no the GOAL IS 500WHP!!!!! Hheheheheheh

i currently put a few this up for sale which are no longer needed.

 

[ForcedTorque]

Rash decisions.........They're so fun with a Supra!

 

[JDMMA70]

Nice, pictures are needed!

 

[arizzle]

Rash decisions.........They're so fun with a Supra!

hah yeah thats what happened when you own a supra! :naughty:

Nice, pictures are needed!

ill post pictures, but there crapp cell pictures! :biglaugh:

 

[arizzle]

well heres a few pictures.

after 2hrs got everything disconnected but the mounts/driveshaft

me so AZN!

heres the new motor. just needs a good cleaning

eagle rods/JE .20 pistons

 

[kcheng]

aww ur helping the piggy lose weight lol

 

[arizzle]

aww ur helping the piggy lose weight lol

HAHAHA yea now it probably weights the same as yours without the motor! :3d_frown:


update, got the motor out last night stripped it down, hoping to pick up the new block sometime this week!

also ordered a set of ARP mainstuds but i have to wait 2-3weeks:cry:,
also going to order new set of clevit bearings:icon_bigg

 

[upgradedsupra]

HAHAHA yea now it probably weights the same as yours without the motor! :3d_frown:


update, got the motor out last night stripped it down, hoping to pick up the new block sometime this week!

also ordered a set of ARP mainstuds but i have to wait 2-3weeks:cry:,
also going to order new set of clevit bearings:icon_bigg

Why 2-3 weeks? Who did you order from? I run OEM bearings btw.

Duane

 

[arizzle]

Why 2-3 weeks? Who did you order from? I run OEM bearings btw.

Duane

yeah 3 weeks :cry:, lordco got them for 100 special order. yeah i was going to run oem bearings but suprasport has the complete set for 100!! :icon_bigg.


and im not rushing this build, cause im gone for a week of vacation after today.:love:

 

[tekdeus]

Order them from the states and have them shipped to point roberts here http://www.thelettercarrier.com/ That's how I do 90% of my car part shopping. Faster and cheaper.