The deck height is the same between the 5m and the 7m, the 5m crank with the 5m rods is a direct swap, this is why I kept asking how much power they will hold .
You would use the 7m pistons on the set up as they fit directly on the 5m rods. 2j, 7m, 5m all use a 22mm pin diameter, You can adjust the comp height with the head gasket. Did this all once before many years ago, abandoned the project due to lack of money.
You would use the 7m pistons on the set up as they fit directly on the 5m rods. 2j, 7m, 5m all use a 22mm pin diameter, You can adjust the comp height with the head gasket. Did this all once before many years ago, abandoned the project due to lack of money.