Search results

  1. S

    timing wont set at 10btdc?

    ok now after replaceing the cps and a new turbo to stop the smoke i try to start the car and it starts and dies now it wont start at all and car wont show any codes or even blink when i do the jumper wire? any idea
  2. S

    timing wont set at 10btdc?

    ok so today i think my true tdc maybe it shows 10 on the crank markings but looks like thats its highest point does that sound to far off? and it didnt fix my timing showing 20 25 btdc and when i try the hole one click back on the cps car will barrley run but when i just line up markings and...
  3. S

    timing wont set at 10btdc?

    ok with the bolt in the middle of the slot its like 25 btdc and i have 0 vac at ilde but my gauge is a pos
  4. S

    timing wont set at 10btdc?

    ever time i try n time it and i start it up with te1 e1 jump and let it worm up i put the timing light on it and its way before the markings on the cover and vac when driving is in between 10 and 15 and if i know my oi seals n my turbo are bad it smoke a lil no and then
  5. S

    timing wont set at 10btdc?

    ok now that i have replaced my tps im showing no codes but still timing wont set to 10 btdc iv reset my timing 20 sence new tps and still same results
  6. S

    timing wont set at 10btdc?

    ok so all in the end my tps is bad
  7. S

    timing wont set at 10btdc?

    i will take a pic in the am i work 2 jobs i dont have much free time please bare with me
  8. S

    timing wont set at 10btdc?

    ok on TDC the cps like the one in pic but still same result and still throwing code 51 iv tested and adjusted my TPS what less can set off code 51?
  9. S

    timing wont set at 10btdc?

    ok i just got off work going to go take a pic of the cps on tdc
  10. S

    timing wont set at 10btdc?

    so when the cps is in all the way shoulde it look just like the bottom pic or shoulde the lil piece that sticks off the rotor more then anything less b lined up with pick up ?
  11. S

    timing wont set at 10btdc?

    theres no marking on mine to line up with pick up and like i said my rotor is dif then the one in the pic
  12. S

    timing wont set at 10btdc?

    the rotor on my cps is a little dif then the one in the pic and iv looked at that pic before and its not a good pic what are u suspose to be lining up ?
  13. S

    timing wont set at 10btdc?

    ok if its 180 off how do i fix that? or tell its not 180 off
  14. S

    timing wont set at 10btdc?

    yes jumping in the box behind the fuse box
  15. S

    timing wont set at 10btdc?

    i can not get my timing rite to save my life iv checked everthing cps is good all my marks are rite for TDC . today i adjusted my tps and still cant get it rite and still throwing code 51 iv checked tryed the hole one tooth back on installing the cps doesnt help iv checked my tru tdc and its...
  16. S

    Timing problem

    it was my coil pack ground wire now to figure out this timing problem
  17. S

    no spark?

    ok it was the dam ground for my coil packs dam who ever wired my car half ass lol
  18. S

    Timing problem

    yah i heard weird nose but vary fant for the past day so i checked my igtion box on my drivers side strut tower and in not getting good volts to it ?