i can not get my timing rite to save my life iv checked everthing cps is good all my marks are rite for TDC . today i adjusted my tps and still cant get it rite and still throwing code 51 iv checked tryed the hole one tooth back on installing the cps doesnt help iv checked my tru tdc and its good lines up with the crank mark and iv rewired my cps to fix my starting problem iv gone threw ever thread on this topic and leads me no ware what less can it be?
timing wont set at 10btdc?
- Thread starter Spoolncruzn
- Start date
the rotor on my cps is a little dif then the one in the pic and iv looked at that pic before and its not a good pic what are u suspose to be lining up ?
It is a great pic. Look at the red lines from the pickup to the rotor.
That is exactly how it needs to be aligned when installing. And then adjusted with a hot idle and te1 and e1 jumped.
That is exactly how it needs to be aligned when installing. And then adjusted with a hot idle and te1 and e1 jumped.
theres no marking on mine to line up with pick up and like i said my rotor is dif then the one in the pic
Ok pull the cps and look at the gear, spin it and align the two holes show with the red arrows. Ignore everything else in the first pic
When you do that now look at the inside. The top two red arrows in the picture below should be close to lined up. Now when you slide the cps in the engine it is going to move slightly. You need to set it up so when you slide the cps all the way in the bottom two red arrows line up
When you do that now look at the inside. The top two red arrows in the picture below should be close to lined up. Now when you slide the cps in the engine it is going to move slightly. You need to set it up so when you slide the cps all the way in the bottom two red arrows line up
so when the cps is in all the way shoulde it look just like the bottom pic or shoulde the lil piece that sticks off the rotor more then anything less b lined up with pick up ?
it should be exactly like the pic. Can you post a picture of your cps. then we could simply say yes it's right or no it's wrong.
ok on TDC the cps like the one in pic but still same result and still throwing code 51 iv tested and adjusted my TPS what less can set off code 51?