Search results

Well I have looked and looked for a used '91'92 Turbo 5-speed harness and well I never can find one, so I finally called the dealership they wanted 704.00 and comes to show that they can't even get it anymore because it has been discontinued. Well, I got a friend down in Texas that works at a...

Do you have a picture of what the turbo you ordered looks like?

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/RA/RA_042.gif I need to know the torque specs fro the rear dif but there are four sets of directions and only 3 sets of 2 bolts, Total of 6 two studs on the top rear.. two bolts on the bottom of that, and two bolts underneath? what do i torque too?

True, I have seen these get really bid due to years of use of hot cool, hot cool. So check that too, great idea there,.

Alright the main thing that gets these bolts off is a hard punch of force. Put a 1/2 wrachet on there with the correct mm socket take a hammer and hit it, iv have done this twice... and it worked. using breaking bars is slow force, and all they need is a good amount of it quick! Try it and let...

Okay well!!! The rear differential is off and the new one has been filled 75-90W royal purple.. Now the rear cradle as you can tell is now painted and has no real bad surface rust.. I am trying to take care of the under body.. The old dif is hard to turn and this new one is very smooth, i...

I am guessing you had the motor rebuilt? Not to many people can say they were 3 months ago and only did the shims on there valves.. Check the spec, and I would check them over again and make sure you did it correctly and make sure they're still in spec, hope your valve guides are not shot.

#1 YES! You should check those! get your car running go out there and squeeze the lines and see if you have any coolant coming out..

I would advise you to throw two ct's on your motor, then run 49 psi on each turbo. More power right? Time to do some extensive reserch on how engines work with high boost

You know I was thinking the same thing sort of. I thought it may be a auto transmission drive shaft.. I got it like this of course so I do not know anything, I took off my rear lugs and found out they were only on there with less then 10 ft-lbs.. so I am inspecting this car. I am nearly done...

Alright well when i got the car I got underneath, which I am right now as you can tell, and I noticed that the drive shaft was not all the way into the rear of the transmission. I know it goes in more, because I am leaking transmission fluid a little, Now as you can see the middle carrier...

Alright the coolant pipe that wraps around the block gasket number is 9613-51300 this is for the 7m-gte Now with the gasket numbers you found are "correct" there is a no.1 and a no.2 and sadly they are the same number, if you want the I have the 3 gaskets you need, 25.00 shipped to where ever...

Oil that is in the Intercooler pipes is normal.. because the PCV system is routed * before your turbo, and then your turbo charges that air + oil residue into the pipes, now.. If a bearing seal has gone out on you... then you will charge even more oil through those pipes.. and the BOV is in that...

Well tonight I just removed the rear differential. Wow one bolt of the bottom of the rear differential would NOT come out, I used some PB-Blaster and let it sit, I came back, and then wow I could not believe it.. I broke it loose, and now the differential is out, I am trying to grind off...

Thermostat in stuck open.. Also is your gas mileage less then normal?

Man please sell that narrow band I had one, and it did.. [ NOTHING ] for me at all, i thought I was sweet, and then realized I was a stupid @ss, and made myself look dumb thinking I was getting actual readings.

Paint your blades more :[ lol? :flamed: Children on here.. :\

Alright thank god!! * You all have no clue how excited I am, we have a post like this one! I had the same connector on my '91 Automatic Supra Turbo. It was like that when i got it, and the car was stock. It did not plug into " Anything " and if it did I could not find out where it goes into.. it...

I guess I don't understand why everything being typed on here can't be correct? When you want " help " with something I personally think it is a pretty damn good idea to spell correctly, not just because it's the correct thing to do, it's because WE NEED TO BE ABLE TO READ what you want us to...

Ahh, well 1/3rd is a very VERY good reason to convert the car to that, I guess I would have to do research and how to use propane and how it reacts with a motor and how much to use, again you did some extensive research or have knowledge of this, gasoline here right now is $3.77 a gallon and was...