Search results

Actually I would've never found this.. it was in maintenance section of the tsrm, somewhere, where I would've never looked, and you're little less fail little more win.. post something useful.. encouragement? I am putting back together my car here and that is the last thing I need to see posted.....

Uhm Thats not the correct DIagram :\ This is.http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=MA&P=12 Also I found it thanks though. 133 Ft-lbs, Front Carrier 94 Ft-lbs

Time...

Alright I have tried to find the spec in the TSRm, the six bolts that hold the rear cross member or Carrier, they're the huge bolts, Someone told me 156 Ft-lbs.?

Good thing they're fixed now.. :\

Note: Some MHG's you have to remove the rivets. I bought one once a long time ago and placed it on there, the rivet placed placed on the MHG and didn't seal.. So that was TMS just to let you know 1.2mm .

Ahh, I did forget about the map sensor thank you, there is no AFM on these 1jz correct? also the flywheel I should've have mentioned.. Well that is good news fro the Ecu I guess, and yes the neutral Safety switch, which you have to run if you have a 7m ECU and a auto ECu so that is also...

Alright, well I am swapping a 1jz into my '92 Supra. I just ordered one and it's coming with. 1JZ motor, Rear Sump, Engine Wiring Harness ( Auto ), ECU, I think the ignitier as well. Will my Auto Trans Hanress work with the manual trans and work correctly when spliced into the 7m hanress and...

Is your EGR on the car still?

if you did not tear up the surface and it is cleaned properly you do not have to resurface your block + head. You didn't. blow the hg right? Just making sure because if you did, you may have warped something .

Yeah anyone think I should plastigue the crank? I just want to make sure I am not screwing anything up... I may have the head redone too, I think stock valves would be fine.

Well. I know I need to check some clearances. I am going to mic everything. I don't really like the 7m lol but oh well! I would like to see this car run. I really want a 1jz, or 2jz right now but I only have.. 1354.00 exactly :]

I did already Nate. I searched, but there was no real sites I could look at I found that Aaron could help, but I wanted a couple more sources, and also what I should expect to pay. :) Don't worry I use that search button

Alright everyone I just took paart a '89 7M-Gte. The motor was perfect. Only the two end main caps had wear on the bearings. The crank has no issues. and the pistons came out with easy. my question is, sense everything looked great, can I buy a new bearing set pistons, and use a " I think its...

The one on ebay is rear sump does that mean it came from a supra?

They have 1 2jz, quite expensive though.... it has 100,000 and they want 1800.00 OBO, uhm.. 1jz will be cheaper for me, what sump do i need for the supra rear correct?

your buddy company has a website are they on Ebay or?

oh thank you. That helps a lot adn yes They are out of cahsers is there a different like engien brackets and oil pans?

I am looking to buy a 1jz tonight. i have seen many on ebay. They're 1000.00 with auto trans ecu and ignitor. Can I use the auto harness and ecu on my 5-speed different wiring? Does anyone have a engine? is there anything I should know? Are some ears bad, some good? DO I need front or rear...

Well good thing I asked. I thought they were different, well now we know.