Search results

Hey thanks for all the input guys. I still haven't decided on which to run as of yet. I am leaning toward the Nitto 555r's or possibly the new Toyo TQ's. But I am sure I would benefit from a wider tire hence the toyo's would be a better route. I would go Mickey Thompson but I just don't think I...

I am 5spd and am about 20 miles from the track. I run 245/40/18 Nitto Extreme ZRs on the back and am very pleased with them on the road, I not really looking for road tires, just tire that will hold up at the track. Then again, I am not a serious drag racer so any tire that hooks better than my...

Hey Guys, I am looking to get into amateur drag racing this summer at the local strip and would really like to get some slicks for my stock rims (rears). I am considering either the Nitto 555R 245/50/16 or the BFG G-Force Drag Radials 255/50/16. They are comparable in price with the Nitto's...

Sounds like a timing problem, double check your CPS to make sure it is all lined up (which means your harmonic balancer need to be at 0 degrees and your cam pulleys need to be notches up.), then try again. Sometimes if the CPS is even a tooth off your car will not fire. Good Luck!

Yeah I don't believe it have an input, but it does monitor RPMs, So I guess I need to either get a maft-pro or find some kind of software that I can use to monitor the 0-5V feed from the UEGO gauge. Does anyone know if the AEM Pro-Gauge software would do this and if it would work with the UEGO...

Hey Guys, Thanks for the responses. Yeah I remember there being a feature for data logging on the UEGO, but I don't have the AEM EMS to import it to, I am still on the stock ecu. I am pretty sure I can semi-log RPM with my SAFC II but I don't know how to do it with the UEGO with out an EMS. If...

I am running an AEM UEGO gauge and would like to use the data logging features so I can monitor and adjust my SAFC II, but I don't know where to start. Supposedly they come with a serial connection (RS 232) to enable data logging. Has anyone done this with their UEGO? Do you have to have some...

You can get a new one from Jeff Watson at Champion Toyota for under 80 dollars. Well worth the coin for a new one if you ask me. Just test each of connections to see which one you need. Good Luck!

Will definitely do, thanks Shaeff. Luckily I am not having any problems building boost :icon_bigg... for now. Thanks so much for all the replies.

Thanks for the replies! I will probably just leave the stock one in place as it seems to be functioning or should I say my HKS one is. Thanks for all the help as always!

You can try this to make sure fuel is making it to the fuel rail.

I would definitely double check your lines to make sure you don't have any pinched. This happened to me a while back on Supra I was rebuilding, I have a hard line from the tank to the fuel filter kinked, caused no pressure in the rail, un-kinked it and worked great. Just saying it happens, I...

Ok, first off I am a little embarrassed to admit that I didn't realize this long ago but I am going to ask anyway. So at SILV this last year (yeah I know this is a lot latter, but I store my car for the winter and am just getting around to stuff), I noticed after looking at others setups that...

I use the NGK 6097's at 16psi and and it runs great! I had NGK iridiums before and I got sputtering (not sure if it is what you are experiencing) but it solved that right away. Boosts smoothly all the way to redline. Good luck. P.S. As to the wires, I run Magnecors and they have been great!

I had these same problems (fp fluctuations) when I first installed my AFPR. Get rid of your liquid filled gauge and get a mechanical one from Autometer, it will cost you under 30 bucks and it makes tuning a lot easier! Then you can really tell if you have a pressure bleed or not. It is hard to...

I am currently running Posi Quiet cermamic pads (order Hawk, but turns out they don't make them for the MKIII?), I like them a lot. They are silent, don't squeak at all and have really good bite. I bought a set of rotors (drilled and slotted) with the pads and I am very pleased. The posi quiets...

Hey I was just wondering if any of you have hooked up the Knock Sensor feature on your SAFC II's or NEO's?? If so is it worth it and did it work? I know Dr. Jonez was skeptical on the actual function or usefulness of it and I wondered if any of you have done it. I just finished installing my...