Search results

  1. A

    turboing a 7mge with out using turbo electronic's

    Unless you just have a lot of spare parts around and figure "why not" see what happens.
  2. A

    BHG Repair

    Would be the same for either.
  3. A

    tps question?

    Knock sensor wouldn't have anything to do with adjusting TPS.
  4. A

    I have fire fuel and air but the car wont start

    Have you done anything else to the motor? Could be several things you have to give more info than that.
  5. A

    Random/Intermittent Misfire and Code 52 (knock sensors are rewired)

    Changing the TPS setting will alter the base timing. Maybe I missed it, any motor work done, could be a reason it's setting off the knock sensor? After rebuilding mine the sensor code would come up on mine above a certain rpm also, changed to a JDM one hasn't done it since. I believe with the...
  6. A

    Random/Intermittent Misfire and Code 52 (knock sensors are rewired)

    Not totally sure, but I thought that a bad knock sensor, code 52, would cause the ECU to pull timing. Have you checked your timing? Also don't think there is an easy way of checking the knock sensor, short of having a scope or just replacing it.
  7. A

    Random/Intermittent Misfire and Code 52 (knock sensors are rewired)

    Check or set the TPS.
  8. A

    A/C problem

    LMAO at you today JJ, thanks I needed that.
  9. A

    Cps oil seal leaking after catch can install

    Sounds like a blockage somewere to be forcing oil out the seal, I'd find out what's going on before too long though, it might be forcing oil out the cam seals and shit.
  10. A

    trouble starting

    Yumping yemmity me thinks uoos rights
  11. A

    trouble starting

    Battery.
  12. A

    What is the name of this part?

    Ummm...tire, spring, wheel, I give up...
  13. A

    Engine cuts out with throttle

    Adjust your TPS.
  14. A

    smell gas when i accelerate hard in my 7mgte

    CSI = cold start injector http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=88 Check the other pages also.
  15. A

    Check Engine Light On before car is turned on

    20+ year old wiring= no easy fix
  16. A

    Check Engine Light On before car is turned on

    Have you checked your grounds, especially the ECU grounds on the intake manifold?
  17. A

    7M build advise please

    If you are replacing the HG due to it letting loose then it would be advisable to check the bearings anyhow.
  18. A

    Sounds like a vacuum leak and rough idle.?

    http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=89 Not sure if you checked the next page, do your injectors rotate freely?
  19. A

    Sounds like a vacuum leak and rough idle.?

    http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=88 And check for leaks at your gaskets.
  20. A

    Sounds like a vacuum leak and rough idle.?

    http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=88 Likewise about checking for leaks at gaskets.
Top Bottom