Search results

  1. CajunKenny

    Questions for those running short shifters

    Hey guys! I'm ready to get a short shifter; but, there aren't many choices out there. For those who are running short shifters or those who have driven MKIII's with a short shifter, I have some questions. 1. What brand/where was it purchased? 2. Would you buy that same brand again? 3...
  2. CajunKenny

    Woodpecker sound only under boost after replacing the Heater Core

    Hi all! I have this woodpecker knocking type sound just as the car starts to boost then it goes away. (well it might not go away; but, it can no longer be heard because of exhaust and engine noise) It can be reproduced every time and the sound is identical every time. It is coming from the...
  3. CajunKenny

    Stock Boost Gauge Pegging at Key 'ON' position after reinstalling the gauge cluster

    I am just now finishing up my BHG, Blown Radiator (installed a Koyo), and Blown Heater Core. What a mess huh...? Anyway, I'm just about done and I decided to fire her up and all of the gauges work fine except the boost gauge. It pegs as soon as I turn the key to the 'on' position. My...
  4. CajunKenny

    O2 Sensor Wire Relocation?

    Hey guys and gals! I was just wondering of anyone has relocated their O2 Sensor Wiring from the stock location. I was considering routing it in a different direction to get it away from all the heat of it's current route. The added length of wire wouldn't be enough to cause signal loss...
  5. CajunKenny

    Here's a sig for you SC300 Lovers!

    Enjoy... :D
  6. CajunKenny

    Anyone looking for a new sig? Here ya go!

    I had a little free time in between replacing my heater core and picking my nose. :biglaugh: If ya like it, take it, if not, leave it. Keep the ponies up! :icon_bigg -CajunKenny
  7. CajunKenny

    I got the dash out and kept my face too!! :D

    I found a little device up under my dash that I don't want. :rant: It's one that has been known to cause MUCH grief! It's an HKS Fuel Cut Defender!!! Can I just cut the stupid thing out of there or should I just leave it alone? The reason I ask is because I'll be installing my 550's...
  8. CajunKenny

    How do I make sure my air bag won't blow my face off while replacing the heater core?

    Hi Guys! I have a 91 and want to start on my heater core replacement sometime this week; but, want to make sure I don't damage or cause the air bag to blow in the process. :aigo: Is disconnecting the battery sufficient? Any recommendations or pointers on this job? Sincerely, Your...
  9. CajunKenny

    Coolant coming from behind my center console

    Hi everyone! As some of you know, I just repaired a BHG about 2 weeks ago. I'm guessing the heater core sustained damage when the BHG happened and is now leaking. I have been hunting this coolant leak for about a week now and just found it today. It's leaking just enough to wet the carpet...
  10. CajunKenny

    I'm repairing a BHG. Do I need to retourque the head studs and when?

    My HKS 1.2mm MHG arrived today. Thanks Dunckel!!! :D I will be putting my ARP Headstuds back in using motor oil on the threads and here are my three questions: Is 90 ftlbs what I should torque to? Should I retorque? When should I retorque? (mileage and/or time frame) Thanks...
  11. CajunKenny

    Is now a good time to install my 550 injectors?

    Hey guys! My fuel system is currently stock except for an Aremotive AFPR. I have a set of 550's, maft pro, and a walbro; but, they aren't installed yet. I currently have the head off fixing a BHG. So, my question is: Will installing the 550's cause problems without the other items...
  12. CajunKenny

    What in the heck is this growing in my head?

    Here's the short story: I recently bought a 91 with a 4k complete rebuild. The previous owner kept meticulus records of everthing and I have receipts of a purchased and work orders for an installed HKS 1.2mm MHG. I get the car and turn the boost up to 16psi and the HG blows on my first...
  13. CajunKenny

    A product of being stuck in the house today

    I finally got around to putting something together for my buddy David. I sized this funny because I'm going to frame in an 8x10 for him. I hope he's going to like it.
  14. CajunKenny

    EGT's Question

    Ok. I'll be posting quite a few questions because I just bought a 'new to me' supra. This car has a pyro gauge. The sensor is plumbed about 3" down from the elbow. When I was driving it home, around 75 mph, with the cruise on and not boosting except on the occasional hill; but, nothing...
  15. CajunKenny

    I have code 21 on my newly purchased 91

    Ok. So I replaced my wrecked 87 with a 91 this weekend. I drove the 91 home (400 miles or so) without any issues. Then today I get a code 21. Could it simply be a bad O2 sensor...where do ya'll recommend that I begin? Thanks...
  16. CajunKenny

    How difficult is it to put TEMS in a non-TEMS car?

    Hi, As some of you know, I totalled my 87 last week. :cry: I am now looking for a shell or badly running car to put my drivetrain and interior into. I'm finding some good candidates; but, some don't have TEMS. I want to keep the TEMS and was wondering if anyone has ever put TEMS in a...
  17. CajunKenny

    There is now one less Supra in Eastern WA :(

    Hey everyone! Well, we had an abnormal amount of rainfall here in Tri-Cities yesterday. My car hydroplaned at 35mph after coming out of a 25mph 90 degree turn. I did a 180, jumped a curb, hit a tree, slid across some grass and hit a parked cargo type truck. Needless to say...my near perfect...
  18. CajunKenny

    What's up with the dash & head lights dimming for a sec when I push the break pedal?

    Does anyone elses car do this? Also the rpm's will drop slightly. No known electrical issues by the way... :sarcasm:
  19. CajunKenny

    Is the stock Anti-Theft Adequate?

    Has anyone had an MK3 stolen? My buddy's 300ZX Twin Turbo just got stolen last night and that got me thinking. Is our MK3 stock anti theft adequate? What have y'all done in addition to the factory system? I was thinking about a removable steering wheel, or 'The Club' (which is iffy), pedal...
  20. CajunKenny

    A question for those running upgraded sway bars

    I'm getting conflicting information on this; but, what I want to know is when you upgrade the sway bars, do you HAVE to upgrade the endlinks? I have been told that if you DON'T upgrade the endlinks, that the rear pot metal/plastic OEM ones will break and that if you DO upgrade the endlinks...