Search results

  1. OneJArpus

    5 years of Supra ownership... How long have you been in the game?

    had my most recent supra since 2006, another 89 in 09/10 and another 89 from 05 to 2009 then my first supra in 02/03 IIRC
  2. OneJArpus

    Anyone ever order parts directly from BIC Performance???

    Yea i've ordered my engine brackets from BIC directly. You just have to wait for it. Typically it takes 2-3 weeks as randy said due to customs and the time it takes to create the said part.
  3. OneJArpus

    No pressure to rear brakes (HELP!)

    Problem solved, used a phoenix injection system.. Injected fluid from the caliper to the master cylinder now its all G... Tons of air inside the system was preventing proper bleeding.
  4. OneJArpus

    1JZ Question

    VVTI = Single turbo as well not twin.
  5. OneJArpus

    Parts for sale

    I've got a rack and im in JERSEY! selling cheap its from an 89+ So it has PPS comes with lines and intermediate shaft
  6. OneJArpus

    No pressure to rear brakes (HELP!)

    WOW this is ridiculous! Returned the MC i got yesterday and ordered another 1 from a different vendor. Same fucking issue! No rear brake pressure. You get 1 good pump out of the MC of good pressure then it just fills up with air after that. I might just need to dish out the cash for a brand new...
  7. OneJArpus

    ABS Delete

    If you use the 1J 5SP and it doesn't have the rear speed sensor will make the light go on and the abs not to work. For some reason my 1jz & tranny came with the speed sensor. 1.5jz now but i have working ABS.... Althought i'm running into braking issues now =/ As stated before, relocate the...
  8. OneJArpus

    No pressure to rear brakes (HELP!)

    My new master must be bad too or something.... just replaced the proportional vavle then the ABS module and still no rear brake pressure. After 2 hrs of using a powerful vacuum bleeder my boss had the rear is still no good... going to buy a new master tomorrow and see what happens
  9. OneJArpus

    No pressure to rear brakes (HELP!)

    I bench bled it with it in the car n the special fittings. Master cylinder is good. No leaks on MC.... but i will try this out! thanks No leaks.
  10. OneJArpus

    No pressure to rear brakes (HELP!)

    Nope gray interior parts
  11. OneJArpus

    No pressure to rear brakes (HELP!)

    Yea both are cheap $0.00 i have tons of parts laying around lol
  12. OneJArpus

    No pressure to rear brakes (HELP!)

    I was reading more on the ABS unit and in the event of a solenoid going bad they should be stuck in the OPEN position so they still provide brakes.... I'm taking off the proportional valve & ABS unit from a donor to see which is messed up....
  13. OneJArpus

    No pressure to rear brakes (HELP!)

    I've done that, when someone pumps the brakes and holds, i open the bleeder valve in the rear the pedal doesn't depress and no air comes out. I did that for an hr on 1 wheel!! i also used a vacuum style on that same wheel for an hr. I've looked over the entire brake system for leaks or loose...
  14. OneJArpus

    No pressure to rear brakes (HELP!)

    Ok, i have all rebuilt calipers and earls brake lines... i was painting my calipers and decided to disconnect my fronts completely as i anticipated a full flush to synthetic DOT 4 fluid. After all the painting and hard work.. the master was dry, i fill n bench bled the master cylinder, i then...
  15. OneJArpus

    How to roll the fenders?

    lmfao as the rust gave way n destroyed the exterior of that car...
  16. OneJArpus

    Which would you pick? HKS drager or Tanabe Medalion Touring

    Tanabe... had the dragger and tanabe and for quiet i would go tanabe...
  17. OneJArpus

    sc300 gte oil pan on a 1jz in a mk3???? does it work???

    Which part of the oil pan do you need? Black bottom piece? I purchased one brand new from Toyota for $120 or so, if it went through to the black piece you might as well take the pan off now and check to see if you are going to need a new pickup and baffle which you most likely will... both of...
  18. OneJArpus

    For those with a 1.5JZ using GE Parts

    My 2jzge is from a SC300... There were NO provisions for the crank sensor on the oil pump nor did the head show any signs of a cam position sensor from my memory as its uses a distributor. THIS MAY DEPEND ON the year... I found a 96 SC300 w/a crank position sensor on it (last pic) but mine did...
  19. OneJArpus

    1.5jz i need help

    which harness are you using? 1J or 2J Its no diffeent for each IIRC. I'm using factory 1J harness & ecu w/ 1.5JZ swap