Search results

Well I got it installed and tuned and had about a week to drive it before driving 1800 miles to Vegas, I made it all the way down and back, and i also Dyned (423 whp at 17 psi) and raced. Not to bad for only a weeks driving on a new EMS. The Haltech ran great, I even taught my wife to tune...

You only need one of the cam sensors, I think I used the rear on my E11v2.

The Precision Intercoolers are great, they are what I use in my car and the intercooler kits I build. They use a Garrett high density core. This is what i mean about internal fins....which one will transfer more heat??

The BIC downpipes come with every thing thats needed to bolt it up. You will reuse the stock steel upper Turbo/ Downpipe gasket. It bolts up just like stock with no modifications needed. Click on the link in my sig to order, or you can order through HPF too. Now about the Intercoolers, I have...

Drone is just a particular low frequency of the engine/ exhaust flow that causes the sound, similar to bass from a subwoofer. 7M's seem to drone more than JZ engines, i think its due to exhaust flow and piston stroke, as the 1jz particularly has a very short stroke (under square). Most round...

Brad, After your drive to Vegas/ Nevada last fall you should already have your answer.... your car got hot on every incline........one of the problems with your setup was that the fans were continuaously on, this is hard on the fans and wears them out prematurley. I ran electrics for a few...

You definatly need a RHD rack, I might have one at the shop, i am not sure if I kept it from my jza70 front clip. There might be someone in town that can rebuild yours.

I have seen both, the A1 are aluminum, and seem really lightweight for the amount of force they need to hold up to, also the end bracket where it attaches to the knuckle was thin steel, I was not impressed at all. The SS ones are super beefy with I beam construction, they light have clearence...

We have tons of RHD cars here in Canada, anything thats 15 years old or older can be imported and registered. The MK4's are just starting to come over for half the price, of anything we can find here. Here is a link to a local dealer, a few people I know have bought thier cars here. Again I have...

You need to set it up as a 6 cyl, pressure sensor, with the TPS with the arrow up, and then calibrate the AFC TPS reading. It could be that your TPS is out of adjustment. If its stock with stock injectors, you shouldnt have to adjust much, maybe 5-10% under boost, the low throttyle wont need...

I always start with a .028 and go smaller from there if it breaks up under higher boost. I run a .022 gap on mine and it still breaks up past 18-19 psi. With small gap you will get a bit of a missfire at idle. JZ engine are notoriuos for weak ignitors and weak, cracked coils. Pretty much every...

Ball bearing T67...wicked turbo on the 2jz, can do 700 whp, and spools quick already, they are known for doing 500 whp at around 18-20 psi on pump gas. Run a .68-70 t4 housing. Give me a call, I can get good pricing on turbos, and would like to put togeather a 7m turbo kit package, I am also...

I have done a few mk3's with dual Walbros on the stock hanger, it works great, just a really tight fit. I will be installing two in my tank sometime before spring in my own car, I have some pics somewhere.......... I see zoonwen is back, I thought you were banned from here??, how quickly...

Never take my Supra in the snow!!, I could barely get the JZA70 into the shop last night with 6" of snow on the ground, it took 5 min to get 30 feet, gotta love bald UHP summer tires. I have a 96 4runner with 4" lift and 33" MTR's, if I ever have a problem I just push the E-locking...

I got them here on my desk, the two semi circle parts are exactly .706" tall, or 17.95mm, and they are .255" thick (6.48mm), and an outer diameter of 1.607" (40.82mm). Just for fun the main outer spacer is 1.161" tall (29.49mm), with an outer diameter is 2.674" (67.94mm) The spacers go down...

With these brackets they just bolt into your car, you just need to get the correct style for your car, there is thew 86.5-88 with the square motor mounts, or the 89-92 styloe with the round motor mounts.

The brackets will Never break!!. If you can break one with engine tourque I will gladly send you another set. The has been no problems in 3+ years and hundreds of sets sold. The BIC solid motor mounts will also never break, garanteed. The stock mounts are a different story, they are soft rubber...

Dont bother with the Aluminum CSF rad, I had one and it didnt fit well, I needed to grind of 1/4" of my lower rad support to fit it (at the bottom tank). Also the part where the rad cap goes is pretty flimsy and will wear out after a while........Sepnd the extra $50-100 and get the Koyo, you...

Post some pics of your setup, what year 4runner, 4wd?

I think in your case you will have to move the rad farther forward. I just put a 1jz into a 89 2wd truck and we had to cut the rad support and move the rad (custom 3 core AL rad) we ended up using a pusher electric fan. But for offroading I wouldnt trust an E fan.