Search results

Will the stock 91 supra motor mounts hold 300-400 RWHP?

Hey guys.....When I suddenly apply my brakes, the whole car jerks to the left. I have two new calipers, I have bled the lines numeros times (with a friend), although when I bleed the passenger front one the fluid comes out at a much weaker stream than all the others. I do have brand new...

Hey guys... I remember reading something about the mustang rack bolting up to our cars....I am at the stage where I need a rack and was just trying to find out if there was a cheaper alternative to the toyota reman racks. If anyone has the part number and year of mustang that would be great...

Well it took 4.5 hours, lots of :x::rant2::madfawk::confused::runaway: but i got it done... I no longer have a rally car :biglaugh: http://i230.photobucket.com/albums/ee37/black87turbo/100_1275.jpg http://i230.photobucket.com/albums/ee37/black87turbo/100_1276.jpg...

Hey guys i put on the front set of my Tein HAs and i hear a bit of noise even when i hit the slightest bump.....it sounds like it may be coming from the strut tower but I torqued that down to spec (25ft lbs) They are definately in good condition....I have ridden over like 20 speed bumps in the...

Alright guys i have a 91 supra....I have 6.5 JL VR components in the front doors...what can i put in the hatch area and also the speaker area by the rear seats to make it sound "good" without a sub or amp? I got my hands on a pair of Pioneer 4 inch speakers because I read on another thread that...

coming to Brighton on Dec. 29th.....anyone in the area with mkIIIs?

I just installed the ST front and rear sway bars.....I noticed that on the end of the rear ones there were two holes where you could bolt on the endlinks to. Mine were set on the 2nd hole.....what is the difference between bolting them on the 1st and 2nd holes...stiffness? :dunno:

I have a set of suspension techniques sway bars...Do i have to have aftermarket endlinks to get the rear sway bar on? From what i have read some guys have had trouble but I am on a tight budget and just want to know if anyone has done it??? -val

I just bought a set of Tein HAs used from a fellow supramania member. My question is this: what is the first thing that you would recommend checking before I put them on the car. They did not come with the adjustment wrench or anything and they look like they are in pretty good shape....but i...

http://i230.photobucket.com/albums/ee37/black87turbo/100_0257.jpg http://i230.photobucket.com/albums/ee37/black87turbo/100_0252.jpg http://i230.photobucket.com/albums/ee37/black87turbo/100_0246.jpg (bird killer) http://i230.photobucket.com/albums/ee37/black87turbo/100_0273.jpg (bad...

Is there a company that makes the 3 guage pod for our cars?

hey guys, i am having a problem with my axle....the rubber part that protects the shaft from bottoming out on the passenger side is all busted and torn up. Therefore I am trying to figure out if i have to buy a whole new shaft or can i just replace the rubber piece??? here is a pic...

hey i was installing new (used seats) and I thought that I disconnected everything I was supposed to but i guess not because the power seat does not work, the windows don't work, my power door locking mechanism does not work. The radio works but is reset. There was obviuosly a short somewhere...

Hey guys....I am idling right at 1200 rpms. I did some searching on this and found that it could be caused by removing a vacuum line/vacuum leak. I checked all the vacuum lines and everything seems to be connected. I Know it could also be caused by the air fuel ration but I have no idea where to...

Hey guys...I am having some serious problems taking off my right rear rotor because the e-brake is locked up. I tried to thread a bolt in the designated holes (in the rotor) but it still wont come off..... I tried prying it... to no avail. Any suggestions?

Just bought me a 91 turbo (also black)....... So it looks like my 87 will be down a bit longer than originally planned :icon_conf . I will be doing a short runner FFIM and to my knowledge you have to pull the AC to make it work is that right??

What is a reasonable price for a shop to assemble it, assuming I provide parts????

Is there a difference between them from the 87-88 to 89+ models?? like there is with the alternator?? ( I know about the threaded holes in 89+ models but is that the only difference???)

I stripped a damn head bolt....... the second one from the front on the intake side..... The rest of the bolts came out without a problem. I am so pissed at myself right now :rant: Any ideas on how to take it out??? Thanks guys