Search results

I started having flashbacks to my time in the Marine Corps as I lay in bed tonight. I got so depressed I had to broadcast this to all my Marine friends and I hope you guys will understand. This makes me very sad and I even had to put my uniform back on just to remember how it fealt. As I...

Got home at 1:30 AM, went to my car at 7 AM for school. Someone slimjimmed my passenger door and stole my GPS from the window and my backpack from the front passenger seat. My $1400 in CD's were left alone, along with my aftermarket stereo system and 4" pocket knife. I had to replace...

I want to paint just my fender and door so they will match my car until I start prepping for paint in a couple months. I know there's a product out there that you can get that's color coded to match your paint code and you can get an aerosol device to spray it. Can anyone paint me in the right...

I have Tein Flex Masters all around, with the stiffness set to maximum and only my right rear tire is rubbing. Anybody have any ideas as to what could cause this? BTW, my rear wheels have about 1" of clearance between the tire and the wheel well. Adam

I just started working at Dominoes this week doing delivery and I must say, the money is damn good. In my first 4 days, I am pulling in about $14.70 an hour, about half of that is under the table. For just 27 hours of work I pulled in just under $400, $181 of that in tips (only about $30 of...

I know Dr. Jonez has the Turbo-A duct in his bumper, I'm curious to see everyone else's pre-89's with their Turbo-A duct replica's. Post the pictures up people. Here's Dr. Jonez Supra. Also a good example of pics to post. Adam

I got a set of 440cc injectors (stock Aristo's) and had them cleaned and flow tested. They are only flowing 405. Is this normal? Adam

I went on the dyno today and my A/F ratio got down to 10:1. My mods are below. Question is, how would putting in JDM 2J 440cc injectors affect my A/F ratio? Below is my Dyno graph and info. 1JZ-GTE, 1 piece aluminum 11 pound driveshaft, 2JZ-GTE MAP, ACT clutch kit, HKS cold air intake, DM...

Just got back from the dyno, not good. Out of 3 pulls, only the first was I able to redline, and only because I was off the gas a little. The other 2 pulls I was on it fully and the motor cut out at 5200 RPM because my air/fuel ratio was rich as hell. The best pull (the only 1 where I was not...

I have a set of stubby acorn lug nuts and I just got a set of 17" wheels. Questions is, will these lug nuts work, or will I have to get a set of lug nuts? Adam

I'm going on the dyno Wednesday with the BPU 1J and my dyno guy is wanting to know what wire he should be tapping into for the tach signal. Pictures would be highly appreciated. Adam

It's raining out, I have 225/50-16 Hankook K106's with good tread, and when I punch it in 3rd doing 65 MPH I lose traction. I must say, it is fun driving on the freeway and losing traction when I punch it. Yee Haw! :D BTW, I've ordered 17x8's and 17x9's with Goodyear Eagle F1 GS-D3's...

Bad news, some douche bag pulled out and T-boned my car today. I was leaving my wheel guys shop and the dumbass in a Dodge Intrepid pulled out without looking because "I don't have a stop sign" and "there usually isn't any traffic on this street." I'm taking care of this without the insurance...

By damper, I'm talking about a little strut that mounts on the strut tower and bolts to the motor to stop it from moving. The only one I've found so far is for the 2J and is made by Weapon R. Adam

I found my boost guage today hiding in my glove compartment, so I needed to find a place to mount the guage. It dawned on me that my Sparco steering wheel doesn't have a center cap and is just the right size for my boost guage. I wrapped a ring of electrical tape around it to make it fit snug...

Just curious, what kind of time frame am I looking at for swapping out my injectors on my 1J? I'm going to be installing a set of JDM 440's. Adam

I have a set of aftermarket reverse glow gauges and I want to know the best way to install them without removing the needles. What is ya'lls tricks? Adam

I'm about to start driving a lot and I'm thinking I should get a beater for $500 or less to save money on gas. How much do you guys save a month on average by driving your beater? I'm looking at 120 miles a week, all city. Adam

How much does it usually cost to ship a set or rims and who should I go through? I need to ship a set of MKIV TT rims with tires from San Francisco, California to Portland, Oregon. Adam

I want to relocate my battery in as clean a manner as possible with as much interior panels visable as possible. Problem is the only way I see this being possible is if I cut the spare tire cover and carpet so that it fits around the battery box. Anybody have any good suggestions? Pics would...