Search results

Ok folks just looking for some input. Unfortunatly I think I remember but not sure. The oil return for the turbo just dumps the oil in the engine block but then goes directly to the oil pan? If so can the stock oil return that is used by the oil cooler be used for the turbo oil return (not...

There was a spreadsheet posted (not sure if here os SF) that had the list of all the bolts on the engine. Anyone have that list? I need to order some and got a general idea of a couple :) but need all them Thanks! NM Found it!! In the MK# supra ref section :)

JJ got a question for you regarding servomotors. most servo motors used in DBW throttle application get driven directly from the sender motor on the pedal. There is a car that does not do that. In particular this car has the sender but the signal goes to a CAN bus and that then gets sent...

Does anyone have an idea what size the thread porting of the banjo bolt in the back of the head is? I know it is a 1.5 pitch but do not know the size (thinking either 20mm or 22mm) just need verification!!

John Hope you don't mind. :) http://www.supraforums.com/forum/showthread.php?t=427200 this is on an MKIV supra but I saw the same thing in my 7m ride :) ps this is the tuner that tuned Duanes supra. :)

Ok folks I just got off the phone with ATI performance. Basically the guys that custom made me my crank pulley they are selling the 7m crank DAMPED pulley for $430 give or take a few bucks If you guys haven't seen the crank pulley check out my gallery...

Ok another electronics post by yours truly - Figgie Who is the audience?: Specifically ANYONE that is running any type of standalone and running a coil in inductance mode and the dwell time is UNKNOWN. This will not cover how to convert the time into angular degree. and you guys...

Well after a long wait finally you TOO can have brass balls like most great rally drivers. how about for you N/A guys... looking for that bar of boost? well look no further. Finally an affordable option so you can feel that bar of boost we all know that the engine is very...

Putting this here as I there is no "electrical" section ;) The toyota IAC is a 6 pole design stepper. Usually labled S1-S2-S3-S4 for the switching ground and B1-B2 for the 12+ vdc. This automatically makes the stepper motor a unipolar designed stepper motor. What this means is that the...

Well then here is the solution to all your problems how to install a/c in you non a/c equiped car... raise the value for having a very cold a/c! All parts availalbe at your local homedepot. Not availalbe for export (sorry IJ.! ;) )

look at picture. (IJ. you are DQ'd right off the bat!! ;) ) anyone care to take a guess what you are looking at?? :) Cookie to whoever guess CORRECTLY. and no vague answers!!!

To me this is the first known consumer application using OLED, http://www.plxdevices.com/Tour_iMFD0.htm

Anyone?? Bueller?? :)

My MKIII Supra conversion to e-85 By Figgie – Supramania.com and supraforums.com The contents represented in this paper are the steps I undertook in my 87 supra Turbo to convert it from running on straight gasoline/Petrol to run with e-85 or gasoline/Petrol. This is based on my...

My MKIII Supra conversion to e-85 By Figgie – Supramania.com and supraforums.com The contents represented in this paper are the steps I undertook in my 87 supra Turbo to convert it from running on straight gasoline/Petrol to run with e-85 or gasoline/Petrol. This is based on my...

Ok I know IJ has his supra running on LPG. I am running e-85 :) is there anyone else that is running anything other than gasoline on thier supras or is IJ and myself crazy enough to do this?? :)

Ok folks looking at the 1jz section and the sf forums. I find it intresting that the general consensus of the 7m is that it can't rev unlike a 1jz. The question (and hence why I put it in the tech side) is can the 7m not rev like previously thought or is this a preconcieved notion that it...

this was posted by Tanabe in another board....

taken from IJ thread over in SM.... How it ships Only two grooves. One for Atl/Water pump. And the power steering groove. A/C or NO A/C?? Your choice. SFI approval no more messing with welding crank trigger and praying they DO NOT fly off. specs Fully damped and tuneable for specific rpm...

Ok folks As most of you know. The 7m-GTE engine currently has two options for crank pulleys. One is the stock OEM crank pulley and the other "option" is the unorthodox research UNDAMPENED crank pulley. Well there might be a third option for the 7m-GE/GTE motor. The best part is that the...