Search results

Okay some more pics of my shit that I tried to do. But never finished Like my custom hood Please mind the drawings The motor that had the BHG. #1 cylinder (oil) I blew the gasket between #1 and 2 Oil in #1 intake and more The motor after I took it out and removed the head and...

A little update for today. Work was good until 10:00am. I was doing an inspection on an industrial pressure washer. It had a few leaks that I fixed. The tank had a mixture of simple green and water in it. I cranked up the motor and was doing a final inspection and boom. The main pressure...

In order to replace studs in the front you have to break the spindle free from the control arms and tie rod. Of course remove your brake calipers blah blah. Then press the wheel bearing from the spindle. And then remove your old studs with one good blow to the bolt end of the studs. I used...

well bad news. I wont get a upper radiator hard pipe out of that pipe. I did a bobo this afternoon. I cut the pipe to size and tacked it together. All went well until I realized I didn't turn on the gas. I can still use the pipe but I just dont want to grind all the porosity out. So I'm...

HED Planet Earth - Bartender http://www.youtube.com/watch?v=HWKkrTCGzqs&feature=related

We'll think of something. I'm not really worried about it. Buy me dinner or something, put gas in my car. I'm cheap J/k. I'm gonna go ahead and post some pics. And now on to the next project: a stainless steel upper radiator pipe. And pics of the finished (but needs to be painted) catch...

I will have more pics later in the afternoon. I just got off work. I'll start to finish it in a little bit. I just need to cool off for a while.

I already got it. I went shopping sunday with a list. its already in the can and the top is already welded on.

Happy birthday Logan. My pitbull RIOT's birthday is on the same day as mine. September,16

Happy b-day.

What I have done so far after work. Its getting there.

BTW I have a new background now

I read your whole thread and just realized that your in austin. Nice to meet a fellow texan.

Beautiful!!! Car. And props to Shay. Very nice also.

welcome and very nice might I say.

What I did in the past 30 minutes. First I cut the pipe, then marked my holes, drilled, and cut the pipe in half. Then i welded nuts on the inside, and welded a separator plate in the middle. And there you have your level indicator. Then I took the two halves and welded them...

I'm gonna make him a catch can tomorrow and I have a stock tube that he can have also.

rustoleum paint works really good if you are using a rattle can

my question: is that rattle can?

Well mine came along right after I cut my left thumb off in 2008. It stands for "Now Thats a Retarded Accident 08". And here is a picture.