Search results

Thanks. Well I want to reach the 700whp goal on good pump gas. I don't want less than 650 whp :nono: But 650 whp will do for me also. And I don't want to take the car to the dragster :biglaugh: I just wanna have fun with it on the streets...that's all. Some high end top speeds on the...

Thanks! I hope I finish the hall project soon. I can't boost much now....But I will post some videos ! I'll try to find the small video with the first ignition and no exhaust system, only the 4" downpipe :biglaugh:

And last the finished 'product'...Completely installed and ready to boost', not much though (only 7-8 psi) cause I am on stock fuel system :cry: The only thing left is the Greddy oil catch can to the PCV system to get the proper hoses and installed them in. I am waiting for the performance...

Here are some more pictures.....

I've installed all the single turbo parts in about two days... I didn't have any big issues...though I had to hit in 5mm a small spot on the HKS exh. manifold to give a safe clearance from the chassis. Also I had to take off the exhaust head studs to fit in the HKS manifold... For my...

Downpipe - Mid pipe: 4" DP and 4" midpipe (ebay) Very good quality! ------------------------------------------------------------------ Other single turbo parts: ------------------------ Boost logic oil feed / return lines Boost logic 3' to 4' adaptor Boost logic T4 turbo...

I was driving my car for 4 months with a blown 2nd turbo on my twins:cry: I was gathering all the necessary parts and all the 'I wanna have' performance parts.:biglaugh: As some people know I was running my 2jz mk3 BPU'd for about 2 years. Here's a picture of my engine bay with the stock...

Yes it is a 2jzgte JDM motor. I will begin my single turbo build thread. But where? Here,at the JZ motors or at the build projects thread ?

Thanks for the inputs guys! I have an HKS GTII 60mm wastegate. The gate's spring rate is set at the softest mode..... I think it is the 0.6 bar minimum spring rate. I don't want to go over 6 psi of boost ,but the wastegate won't open before 8.5 psi (0.6 bar) of boost. So max boost set on...

Hi guys! I blew my twins some time ago,and I just installed a GT72mm turbo... I've ordered my fuel kit.I should have it in 2 weeks.Then I'll go EMS. For now I'm on stock ecu (jdm MAP) & fuel (440cc). I have a JDM 2jz mk3 supra:biglaugh: I drive my car but I never go past 1-2 psi of...

Nice job. And the outcome of the paintjob is impressive... Keep on!

+1

Hey... Welcome on Supramania! I am from Europe,Greece and I bought my supra mk3 from Germany! When you say supra A7 (MKIII) 173kw :560 ... you mean the 86-88 models, correct? Anyway..in Greece we have : 8 mkII , 21 mkIII, and 12mkIV xaxaxa! Supras are like aliens overhere.

I knew that the stock lines on a mk3 supra could flow about 500 Bhp ! And I didn't know that the stock mk3 feed fuel line is so 'small' :sarcasm:

I am building my own fuel system. I am going big single soon :naughty: I will run 2 intank fuel pumps.The pumps will feed 1 single line to a "Y" block seperator near the firewall.After the 2 feed lines will go to the dual feed fuel rail,which will be two -6AN feed lines. My question is the...

+1

If you don't have the E10 plug you can't start the car! And there are more usefull wires than you think :biglaugh: You'll need the following wires to connect / hybrid-custom wirring on the E10. Pins 1 - IGSW 2 - SP1 4 - STP 6 - W 15 - ELS 16 - TACH 19...

Yeah....good luck. It is going to be a beast ! Deffinetely change that yellow colour.... and yes the dark Silver colour will look awesome!

Nice car,and nice build up! Gongrats...and good luck on tuning that beast. I love silver colored mk3s,mine is also silver (2jzmk3) and I am from Athens,Greece! As for your eibahs springs...(i do have them with tokicos) will slightly drop more after some miles,not much but it will look...

Yeah..It's Nick's supra! :biglaugh: