Search results

thanks. I found out that I have a leak in my lower water neck. It wont be to bad to fix. I might be able to get the couplers from a friend this weekend. If everything goes to plan I might be able to start driving her every day starting next week. Today, I put back together the interior. It is...

http://www.youtube.com/watch?v=h21MK4yTVco

http://www.youtube.com/watch?v=L1XgKQ-FMK4

Using stock twins. Im having some trouble figuring it out on my car, I just wanna see what other people did. :1zhelp:

Will do :evil2: ill be posting videos of everyones first reaction too after I break in my clutch :biglaugh:

So it turns out the oil drain bolt is stipped =[, ill be draining the oil, drilling and re tapping the hole. ill be using a really thick grease to catch and metal shavings. Ill be putting a thread insert in too. Ill be hooking the IC up tomorrow along with the radiator, maybe even take it out...

I got the car started tonight, Ran it for 20-30 second only. I was not getting power to the fuel pump, so I jumped it for now. Ill be setting up a relay for it to come on when switched. I needed to mess with the TPS to get it started too. so ill me fixing that too.

I took some sand paper to the edge of mine, after that, it went in no problem.

with the idler, I didnt have the torque spec on hand, but did tighten in down plenty. maybe ill take the timing cover off and just break it loose and re-torque it. Oh and another question. I dont have a torque wrench that meets the crank pulley tq spec. Is it alright to have it at 170 for a...

ok, the thing is that the harness was made for the 2j sensor. Can I just wrap the wire around that little nipple on the 7m sensor

1. The return fuel line is the line that runs through runner 2/3 on the Intake mani right? 2. I think I forgot to put threadlocker on the timing belt idler, should I go back and put some on? 3. I got the Oil pressure adapter from DM, Do I put the stock 2j sensor on or the 7m one? Thats...

Rained out on sat, did as much as I could today. I atleast have the engine out and the 2jz is a couple of hours work away from being in. 7m wasnt as dirty as I thought it was going to be =D. Mating the trans up with the engine by tuesday. Going to be...

Thanks! ill break this down by time. ASAP Get the car up and running again. Exhaust 6 months-12months brakes/rims/tires. Maintenance! either find a new rust free shell, or repaint(stock color) and clean up the interior 12-?? months Coilovers/sways/bushings Single. Not to...

They could of sprayed some wd40 down each cylinder, when I looked under the engine and up into the cylinders, I didnt see anything to throw up a flag. I do plan on doing a mild build sometime in the future.

the bottom of the crank(not the bearing surface) was a little surface gunk, just took a rubbing with a brush to get off.The walls of the cylinder looked good from what I can tell.

Engine comes out tomorrow! will have a busy weekend ahead of me, expect updates!

should of ran him over for hitting your car :icon_evil

This weekend im pulling the 7mge out, and maybe even putting this bad boy in. The harness is done, Dr Tweak is the man for making my harness look new. Im hoping to have it running by next week. Im waiting on 2 gaskets at the moment. My goal is to have it started up and mayne even running on the...

How she sits right now new cams crank tdc intake cam lined up ex cam lined up which hose is the inlet for the heater core and outlret? ghetto fix, i hope it works

still having a problem with the bic mount. ill take a picture today