Search results

My stock leather seats are in very good condition for their age but they do have a couple of minor imperfections and a little ripping. I have been looking at some leather repair kits and was wondering if anyone has had any experience with them. I was wondering if their worth it or not? Or should...

It was here you said it. Sorry, no big deal...

I am located in Orange County..... Middletown, NY Anyone know the size differences in the srt's turbo compared to the supras?? Is there that big of a difference?

I did remember seeing people saying that anything more than 14psi and your just blowing hot air. But then I see that people are running 18psi.... unless that was with an upgraded ct-26

I saw that you said you would need a base tune for a piggyback. The stock maps are the piggybacks base tune.... you are just adding or subtracting fuel from the stock maps. Only a standalone would need base maps.

What psi on a stock ct26 is good to beat out a slightly modded srt-4 (intake exhaust) and stock weight for the supra?? I have the lex, 550's, greddy e-01 boost controller, and 2 1/2 hard pipes. I am just about to put it on the road and I just want to give the srt guys a good look at what the...

Not sure who jay marks is. I'll have to do a search on him. I saw a post on how someone paid around $55 each. I'll try to find it.

Can anyone tell me where to get the 98tt motor mounts fo $55.00ea. I have searched every word combo I can think of on google, yahoo and ask. I cant seem to find them anywhere. Thanks

I'll definitly try that tomorrow, any other opinions. thanks

I recently pulled my engine to change the oil pan and as I was putting everything back together I decided to do the SOGI wastegate mod with 4 washers. Before I did this I was hitting 12lbs of boost with a home made manual boost controller the owner before me installed. Now, my problem is that I...

What sensor is this exactly? Can find an answer in the haynes book or trsm. Thanks

Thanks, thats exactly whats going on. Plus, the second part about the ps up vac, he also disconnected that because theres nothing on the other side hooked up and plugged the bottom of the accordian pipe. Cant thank you enough, josh

Do they connect to each other?? Could the previous owner just left them off? I cant find a line to connect them to.

Nice, Thanks alot

My vacuum lines had been mutilated by the previous owner and I'm just trying to figure out what goes where. In the first pic, where does this end up? Is it the bottom of the accordian tube? In the second pic, the one circled in red, Where does this end up(the other end)? Also in pink...

Anyone try these solid motor mounts from 935 motorsports? Are these all I need to buy or should I get the 98' mkiv motor mounts? http://935motorsports.com/catalog/product_info.php?cPath=79_14_62_218&products_id=1044 or how about these...

Here are my choices. What would you say: http://www.brandsport.com/gowhlofor12x2.html There is a toyota shank style but I was looking for something like the first one.

I have the mkiv tt rims and know I need a 12x1.5. What degree/angle are the lug nuts on our cars? I want to get locking lug nuts (set of 4) and cant seem to find what degree/angle we have. Thanks

I have the Emanage + E-01 + PLX wideband to monitor the a/f ratios and datalog. The zeitronix couldn't interact with the e-01, thats why I sold it to you. I just keep looking at the $300 pricetag of the fpr and I'm seeing if I can do without it but I'm not willing to risk my ride for the $300 fpr.

Also, If I do have to get the fpr, Do you recommend getting the fpr w/ gauge or the fpr w/ gauge and install kit. Is the kit easy to make?