Search results

That is sweet! Very impressed, are they claved or just wet lay? Thanks for the contributions to the community! Seth

Yes that is correct the vendor took care of the shipping for me and actually I did not send it back to Mishi but rather the vendor and they send me a new one and then were taking care of everything for me. HTH, Seth

I run the mishi no issue here, I did receive the first one damaged but that was taken care of by the vendor. Both did not have the bottom fitment issue but I did not ever try the stock shroud but rather built a custom aluminum one. I would go for replacement as well if I were you they seem to...

Cool cool, thanks for the information! Seth

Hey Brent, When are you hitting full boost(RPM)? Also what is you base timing? Thanks, Seth

If you put the TB straight out it will hit the hood for sure. There is a cross brace in the hood itself. Really need to angle it downward at about 15 degrees but I am still trying to figure out how the housing does not touch at the very tip anyways! But nice work and as suggested radius the...

Seth

Plenum is .125" wall. I think the flange started as 3/4" and then was tapered to make it so the manifold fit correctly! Seth

Did you forget about the hood? lol That will not clear the hood especially once you get an IC pipe out there, trust me I know from experience hence the coupler.... Seth

You sure that is the best way? ;) Seth

Can't figure out why go with the stock TB when a custom CNCed TB can be had for $150 or less and be an upgrade in size and look! Especially when you are welding a new flange on anyways and are you both following my steps? 5 Years ago: :) Seth

Looks a lot like one I did last year as a one off: Of course minus these facts: Mine was aluminum 4" pipe VS his at 2.5" or 3" Don't have to have solid mounts to run it. But in response to his manifold good to see people are trying to develop new products but I must say steel is...

Why was this not instantly moved to the vendor issues area. Sometimes I don't get how the forum works...but whatever. Only ordered from Rich one time but he had good service! Sorry for the haters Rich! Seth

I run the Mishi albeit it took me 2 as the first one came damaged it is a nice piece. I am pretty sure the stock shroud will fit yet I made a custom one so my IC piping would fit with the thick radiator. Never seen the temp climb past mid way and I drive my car pretty hard in the heat and...

Just some thoughts on the manifold. Have you put the hood on yet? It is a lot thicker then you think! Also have you put the radiator in? I am curious if you are going to be able to fit any piping in there it seems like it sticks quiet a bit to far foward to get piping in there. But cool...

Nay, That is way to much for that car. I would offer him $800s tops. Lots of miles, oil leaks, bad paint, and interior. Wait awhile something better is sure to come by. Seth

New Plug and play MS just came out: http://www.diyautotune.com/diypnp/ Only for the 91-92. The forums have tons of information on them though. Seth

Thanks for the information guys! Just what I needed! Seth

Hey Guys looking for some information on the difference between TPS's. I have 2 different ones I have mounted to custom TB's and they were both different. Different rotation/mounting position between the two. The one I currently have has irratic readings on my S-AFC and it idles irratically...

Solids with a 4mm worth of silicone bushing between the frame and mount. Ran it with out the silicone bushings but made too many vibration noise in the car(things rattling) Quite a bit better with the silicone though so I will see how long it lasts before it deteriorates. Seth