Search results

I don't have the time to build a tranny at the moment.

Hot tank, wash with soapy water, dry, spray primer first or it may not stick to the block (mine didn't), then paint (I'd do at least 3 coats).

My car came with a C's and I've got it apart but its been too long to put it back together, does anyone know online where I can get instructions/details? I couldn't find C's website. Also if someone has the C's out of their car, I need the measurement of the 2 half circle pieces (just the...

Ok just getting around to pulling the tranny but I heard another sound, at idle there is a thumping sound like something is hitting something. I can feel the beat of the noise in the clutch slave cylinder its weird. Also found the shifter bolts were all loose but I assume the noise would...

^Thanks, for the info. I'll get some pictures later but I have a problem with the fitment on mine with the gap between the front area between wheel well and door, also I think my tire hits the skirt when turning during spirited driving, I am running mkiv tt wheels with a 45 sidewall, anyone...

I'm so down, my car is getting really close. (Driving, just fixing the little bugs with it) Jake, with some wire, solder, solder gun, and o2 sensor socket (assuming there is a bung in the dp for the wideband sensor?), you are running! Let me know when you get settled in.

I was waiting for you to chime in before I made sure but this is what I was thinking. ;)

The fronts too? I only have 1 mounting point on the front side into where the front mud flap used to be.

I bought them a while back, I can't remember if they were authentic or replicas. Can you post a picture of your mounting points?

Jake you don't know how close you are! Its like 6 wires- I'll get John to chime in on it. Don't sell the AEM!

Wondering how well everyone's skirts fit (with Bomex side skirts), I think mine are fit pretty poorly, I think mine may be knock off sides as well but they look well made. People with the sides could you post a picture and maybe some mounting points? Also does anyone have problems with their...

Its definitely coming from the tranny, I'm gonna finish pulling it out tomorrow.

Congrats Nick!

That is awesome, I had no idea they sort of stacked the cylinders on each head like that, I thought they went tradition and straight across.

Pulling the tranny tomorrow, my dad is saying he doesn't think its the input shaft bearing because it will still do the noise in 4th gear, he's saying it shouldn't make noise in 4th gear because of its position or something, anyone know what I'm talking about?

I need 2.5" and up, are you saying its too weak for say 16 or 18 gauge aluminum piping?!

Expensive overpriced tig welding in my area, and they aren't even dime welds, this is a financially strong decision in my case.

I'm just looking to do strictly intercooler piping, no crazy thick gauge, should be able to handle it right?

Is yours the Harbor Freight one?

Great minds think alike, this is the one I was looking at, what size piping will that fit up to?