Search results

Thanks for the info on the aluminium flywheel. I just weld my act 6 puck ceramic disc to my fidanza flywheel. How about chromemoly flywheel or other lightweight flywheel. I hope I didn't throw my stock flywheel. Do anybody know what cause the welding?

You need slicks if you're spending alot of time on dragstrips. Slicks will drop 60 foot times below 2. 26x10.5x16 mt et streets will fit on stock sawblade. Replace your bushing with urethane to eliminate wheel hops. Keep the 4.3 LSD.

From what I've heard you can get good traction with drag radial if you do good amount of burnout. Melt them real good.

I really don't see what's wrong with winged warrior event. This is amateur level event. Autocross and drag racing. Very basic tech.Yet for the past 2 yrs we went there, none I repeat none, zero, zilch supra participate in the event. I like to see one supra in there. Have one race car and...

I am in the same boat with you. I've been replacing clutch disc everyyear from drag racing. From my research I found out multiplate or disc is the best setup for drag racing. But they are pricy. Cheapest I think is $1500.00. The cheaper option is single disc with bronze or feramic from...

I need suggestion for clutch setup for drag racing that will last longer than a year. I can't afford multiple disc setup. I've tried kevlar and ceramic disc. Both last less than a year. I am tired of replacing clutch every year.

Just polish it.

If you cap the tb port your oil in the pan will come out of the dipsticl under boost. I was checking for boost leak when I found that out. I hear boost leak at the hose coming out the tb post so I plug it. Couple seconds later I saw oil pushing my dipstick out.

Where is the o-ring on the cps? Is it the black ring on the shaft? How do you replace them? Mine is hard like metal. Where can you buy other than dealership?

I'll be there. I went last year. There was only 2 mk3 last year.

You can cut the drill bit for shorter length if you can't find short drill bit. Right angle drill or adapter is needed for drilling close to the firewall.

There's a nut at front of ac pulley tensioner that you need to loosen.

Don't do roller paint job . For the sake of other Supra owner.

I will dyno

Should be the same

Probably not much cooling at all. Its only a little slit about 3" long. You can find them at ebay all day.

I think parts cleaner eat plastic.

I am using the home depot pvc pipe with air chuck. The pressure is 25 psi. The design is like your picture. Maybe I need to take it apart and look at the seal again. Thanks Dave. Yes I will be going to Indy meet.

I have boss 550 turbo. When I check for boost leak I found leak behnd compressor plate. Is this normal? I can't tighen it anymore.

Nalleywhacker, what tires are you running on the front? Bias ply or radial? Are you using tubes?