Search results

Like I said it comes and goes gets worse then goes away. I'm at the point where I'm going to just redo it all over again and pray I don't have to buy new pistons.

The plugs are NGK bkr7's gapped to .028 I've never had problem with these plugs on any of the motors I've ran 7M and 1J's Also when cranking the car with no fuel or spark and the plugs removed it sounds normal. You can look down into each cylinder and everything seems to be looking and...

That pic is of cylinder number four I looked at all plugs and all are seem to be untouched by the pistons. Also it wouldn't explain why the sound is slow or why it comes and goes. In this photo the plug at the bottom of the picture is plug #4

I'll pull the cams in the a.m see what I find.

No worries I wonder why it comes and goes. I'm gonna pull the motor and find another shop/friend to go through it for me

5w30

We looked and pulled and pushed all over

Yes. I forgot.

When we pulled the, they seemed a bit oily but I didn't know if they got oil on the,pm from the top of the galley.

http://m.youtube.com/watch?v=OvW6ApJHl9E

So we fixed the no start and idle problem but the knock has returned and left and returned again

Could just plug in the Aem and see what happens lol.

The EMS has been sitting on the sideline awaiting its turn the car has been starting on the stock 1jz ecu jza70

Yeah it I've lived other places but snow is pretty rain in the city but if you go to the mountains (very close to the city here) there's snow a couple days out of the year.

It can get down into the 20's at night but very rare mostly stays around 55-60 Right now at 11:45pm it is 65F

We have had a lot of problems with this we were having to jump te brand new battery more then once to get it to start and this was right after the car had been running.

Not yet

K ill do it tomorrow. Still have to figure out why the car won't start anymore. After that last time being started at the machine shop the car died and when we went to restart it it seemed that battery was not getting enough volts to start the car... Just a click and nothing else. The car...

with the block off plate or just put my hand over the hole on the valve?