Search results

buy a new silicon connector. ive had good luck with this company: http://www.siliconeintakes.com/

my car has MKIV TT wheels with project kics spacers, 25mm front and 15mm rear IIRC, dropped on eibach springs.

cheaper option may be to buy used 3 piece quality wheels (BBS, volk, etc) and buy new barrels.

to do it properly, you would have to do something like this: http://www.motoiq.com/magazine_articles/articletype/articleview/articleid/1709/project-miatabusa-part-5--de-powering-the-steering-rack.aspx

30 seconds of searching: Fuel rail inlet: M14 X 1.5 (-8AN or -6AN) Fuel rail return: M12 X 1.25 (-6AN)

keep up the good work!

nothing wrong with cutting the springs, it raises the effective spring rate. the bouncy ride that often results is due to the shocks/struts not being a good match, and/or dead. i ran cut stock springs with Koni yellows, handled great and wasnt bouncy. however, if you can afford it, buying...

10 x 1/16 = 10/16 = 5/8 = 0.625" = 15.875mm = .01736111 yd = 15875 um = .71428571 finger (yes that's a real measurement) = 0.03175 cubit

how is the quality? do you remember what you paid?

i was wondering about this as well, as it seems like a good alternative to sumping the stock tank.

you should be able to find a set of taillights cheaper than that, used of course. i bought my JDM 89+ tails for around $150.

what, your igloo not have a phone line?

any opinions (good or bad) on this: http://www.wpctreatment.com/ I contacted them awhile back, and they charge $4/half shell. and an article about it: http://www.motoiq.com/MagazineArticles/tabid/59/articleType/ArticleView/articleId/17/Special-Treatment-Part-1-All-you-wanted-to-know-about-WPC.aspx

I'm looking at this turbo, or the 6265, and a few people have suggested the 6265 with a big exhaust housing, like the 1.00, and then run the QSV.

call your credit card company and demand a refund, then go buy from one of the vendors here on the forums.

very nice work!

I'm a mechanical technologist (similar to, but not as qualified, as a mechanical engineer), got my diploma from a local college. I work for a naval architect, where our primary business is designing luxury yachts. Our most recently completed project is a 45m motor yacht...

rolled it yet?

if you still need shims, i bought mine from http://cylinderheadsupply.com/valve-clearance-discs-25mm.html

i want that insurance, thats a killer deal. stupid icbc!