Search results

Got it off today. Slight stripping of one of the targa bolts. but have new ones on the way. Thanks for all the help guys! I really appreciate it!

So far Ive used WD40 and Liguid wrench on it......and nothing. Im going to let it sit outside in the heat (a wopping 57*F) and see if that might help me. While it sits Im going to go grab some PB Blaster, and see if that does the trick. I dont understand HOW they could be so tight. I dont...

Well one has become slightly stripped, but is still gripping ok. I pmd you about the bolts though. And They bolts are seized on, I cant figure out how to get the top off. haha.

So I got new seals for my targa and wanted to do them tonight. So I hope in my car, and break the back 2 screws loose. Grand. Then I go to the front 2. Yea, they are seized on there quite nicely. Actually so well in fact that, an allen key socket connected to a rachet with a cheater pipe on it...

what were you A/F ratio under boost?

GO to your car. Remove dipstick. Clean it off and place back in, remove dipstick again. Tell us what color you see. Chocolate mike/Coffee color, or regular oil color....

Dont sleep on the sprint man. I had an 87. Those bastards are QUICK. it may be 3 cylinders, but they can push that little car fast.

I removed Most of the vaccum lines on my car. I have vac for the Bov, FPR, and the Bost gauge. The boost gauge and FPR are getting Vac from the nipple off the back of the intake manifold. The BOV is getting its vac from the port at the front. My readings at idle without vac applied is 45psi...

Any body have some ideas? I have a few from a friend of mine. He told me to Fix A few of the vac lines, if that doesnt fix it, then redo the gaskets on the intake mani and acessories that are attached to it. Anyone else have an idea of what could be the problem? ---------- Post added at...

If it doesnt keep well, then how is it possible for gas stations to keep it?

Yea, I wish florida had more gas stations that carried E85. If they had, I would have considered doing this ALONG time ago. But Unfortunately, I dont see florida dropping the coin to add more pumps for E85. I believe there are 12 gas stations in ALL of Florida that carry E85. And the closest one...

How about the rear subframe bushings? If yours are cracked/broken it will allow movement.

So fellas, when is this ohio meet gonna go down. Im going ot be putting a new setup on my car next month, and I wouldnt mind showing it around to the locals. And I want some opinions.

http://www.youtube.com/watch?v=RlMng9xOe7A

HOLY SHIT! What did you do to get in such a bad wreck? if you dont mind me asking.

If your really looking to protect your money......GET RID OF IT AND GET GOLD BARS. The US dollar is depreciating in value, so go get some gold/silver/platinum bars and save them in your basement, or something. Think of iit this way, gold is at 1400$ an ounce! you get a gold bar and save it for...

Yes, he posted it a while back. It seems to be real. Yes its advertising his company, BUT the facts he is spitting out are quite scary.

Electronics are all stock, except for the Neo to help tune the fuel. The problem was not there before, correct. But i just hooked a vac line to a mechanical boost gauge, and am only pulling 10 mercury of vaccum. So Im thinkin a vac leak might not be helping my problem. haha

So me and my buddy indymk3, installed my afpr today. Once we got the few little leaks that happened fixed, it was time to start her up. Started her up, and it idled like shit at 30psi off vac. So we added vac to it, and it didnt help one bit. So we up the fuel psi to 40, it idles better but...

geo metro