Search results

I think IJ used one, I'm sure they are listed in his multiple build threads somewhere.

Is that an electric steering pump? Looks like a Honda or MR2 pump?

Something like this might start you out, just need to figure a way to turn the stock speedo. http://www.marlincrawler.com/transfer-case/parts-upgrade/vehicle-speed-sensor-mci As grimreaper mentioned, it wouldn't be too hard to rig a servo/stepper to do the job.

4"x4"x0.25" aluminum square tube, 4"x1/8" bar stock cut to size, a Vibrant cap and bung, TIG welded by my favorite local welder, then powdercoated in Anodize silver. Added the push connect fittings (1/4" NPT) and cad plated bolts. It fits beside the radiator, where the stock battery is. I...

try the for sale section, there's bound to be someone parting out a car that can sell you just the parts you need.

If you guys want to make your own, it's pretty easy. The MKIII font has been posted, so all you need to do is get that, and use any number of free cad programs to make a 3d model. Once you have a model, companies like Shapeways can 3D print in a variety of materials. You could get it printed in...

I don't have a link, but I used a 36" lokar cable. Once you have the cable in your hands you will be able to figure out how to make it work with the stock pedal. I don't use a stock throttle body, so you will have to figure a solution for that if you are. I run a BBK throttle body, and I just...

that misfire is probably from the multiplex ignitor, mine does the same with the v1. search for the DH61 ignitor conversion to eliminate it.

finished my new overflow

The stock speedo signal doesn't work with the AEM. I had a log where I went from 0 to 3000 mph, so I think it's off by a bit. With that said, I've learned that you can get a clean speed signal from the ABS system. I haven't implemented it on my car yet, but from what I have found you tap the...

wow that is fast. Nice work! more info on the rear suspension?

Lokar sells a few different ends, I currently use a carb fitting (looks like a mini rod end) and I'm switching to a cylinder to fit my new throttle wheel.

Buy a Lokar throttle cable. Variety of sizes, not too expensive, and they look nice.

pulled the compressor cover to polish it, removed the old wastegate actuator only to discover the c-clip on the wastegate was corroded on... damnit. So I'm hoping penetrating spray will loosen it up so I can put my new driftmotion 12psi actuator on...

Refer to the AEM manual for the proper pins for your year, but on my 88 I used the PNP pin for the AIT, which is 8C, and pin 2-5 which is default for the MAP. Again, refer to the AEM manual and it will show you which pins are which, and how to go through and set up each sensor (for example if...

From http://www.weirperformance.com/finaldrivegears.html Supra 1986.5-92- ALL New ratios: 4.11, 4.56, 4.88, 5.29, 5.71 $225.00 ea. **NEW** 4.30 ratio $227.70 ea. Used ratios: 3.58, 3.73, 3.91 - Contact Us

saw this and thought of your car. It would be a ton of work, but every ounce counts and it's free (just takes time): http://cdn.speedhunters.com/wp-content/uploads/2013/06/DP_Motorsports-023.jpg Do it to every part you can would probably reduce the weight a bit.

We have meets when we have running supras... hehe. My car needs a tune and a few other things, another local is Nashman (his engine blew on the dyno, hes rebuilding now), and there are a few others around.

I have nothing useful to say about your problem, but I figured I'd let you know there are a few Supra owners here in Victoria, some with actual running Supras! We help if we can.

it would take some modding, but BMWs use a thread in tow hook. You could install one front or rear in a supra by welding a nut into the bumper support and drilling a small hole in the bumper. The nice thing about this is you could take them off when you are just driving on the street, just use a...