What kind of adapter I need for a Garret GT35R oil fee?

[CarlosPTR210]

What kind of adapter I need for a Garret GT35R oil fee? :1zhelp:

I use my old a 90 Degree -4 AN to Male 1/ 4 in NPT adapter and don’t fit it!.

In the Garrett web site, said that I need to use a thread for 6.35 Tube inverted flare connection!

So, in summit are many different adapters, I don’t know wish one in the right one ?:3d_frown:

4 AN to 7/16"-20 Inverted Flare, Steel
4 AN to 3/8"-24 Inverted Flare, Steel
4 AN to 1/2"-20 Inverted Flare, Steel
4 AN to 9/16"-18 Inverted Flare, Steel
4 AN to 10mm -1.25 Inverted Flare, Steel

I’m having a lot of difficult to install this turbo, is totally different to my dead Precision turbo T4 60-1 :cry:

 

[MDCmotorsports]

Carlos:

You'll need this for a drain.

http://www.atpturbo.com/Merchant2/m...D&Product_Code=ATP-FLA-019&Category_Code=GTBB

And you'll need this for a feed.

http://www.atpturbo.com/Merchant2/m...D&Product_Code=ATP-OIL-021&Category_Code=GTBB

 

[CarlosPTR210]

Carlos:

You'll need this for a drain.

http://www.atpturbo.com/Merchant2/m...D&Product_Code=ATP-FLA-019&Category_Code=GTBB

And you'll need this for a feed.

http://www.atpturbo.com/Merchant2/m...D&Product_Code=ATP-OIL-021&Category_Code=GTBB

I bight a 1/4 male inverted flare for break lines and use some adaptors to conect to a -4 an hose, but don't have the restrictor, what do you think?

 

[di_rosa]

there's some controversy on the topic of restrictors or not with supras. some say yes, others say the supras don't make enough oil pressure to cause a problem. some people i have read run -4's and -3 feed lines with no restrictor and no problem. i personally tried for weeks to get one from a local shop that screwed me around, so i gave up and ran it with a -4 line. no problems, and mine is a gt40r