Vacume lines

[supra153624]

ok does anyone know of the correct way to hook them all up with after market parts? the lines i know of that are hooked up right now are

1. gas evap
2. power stering / were does the other vacume line that ran into the stock intake after (MAF) on the underside of intake
3. fuel regulator
4. EGR (no change when disconected)
5. boost sencor / located near driver strut tower (no change when disconected)
6. cruise control (disconected)
7. blowoff valve / aftermarket, (no change when disconected) *note: (bov) seems not to work after spool up and discharge, the internal wastgate over rides it even when the vacume lines are disconected, sugestions for that?

 

[sneakypete]

not really sure what the question is..... or should i say the problem

 

[supra153624]

not really sure what the question is..... or should i say the problem

is there a basic diagram or a picture of were all the vacume lines should go?
what can be taken off and what needs to be there?

 

[sneakypete]

everything should be connected. there should be a diagram on the hook showing where everything should go.
otherwise look it up in the tsrm
-pete

 

[DegreE]

No, But I can show you how to spell vacuum.

 

[MkIII_Jeff]

When I did the Hose Techniques kit I used the diagrams on this page. Is this what you need?

http://cygnusx1.net/Supra/TechTips/vacuum_hose.aspx

 

[supra153624]

When I did the Hose Techniques kit I used the diagrams on this page. Is this what you need?

http://cygnusx1.net/Supra/TechTips/vacuum_hose.aspx

all right thank u jeff, and thank you (degree) for being a smart ass

 

[mista_sup]

all right thank u jeff, and thank you (degree) for being a smart ass

same problem, but what if you have no egr. have a jdm motor what do i connect them?

 

[Pantaloon007]

No, But I can show you how to spell vacuum.

If he read either the TSRM or the hood sticker he'd know how