Torque Plate?

[suprarich]

I need to make about 10 or 20 of these and sell them.


This is pics of my titanium torque plate.

 

[rcboricua07]

I need to make about 10 or 20 of these and sell them.

This is pics of my titanium torque plate.

hey i was just wonderin if u can by any chance rent out the torque plate to me...also how much will u be selling the torque plates for?

 

[suprarich]

I could make some out of aluminum. The titanium one will never leave my sight, you don't want to know what that peice of metal cost.

 

[Sawbladz]

I need to make about 10 or 20 of these and sell them.

How much? I'm not kidding or wasting your time. I don't want to build my motor without one. I don't want the inconvenience of renting one and I can't find one north of the border anyways. Shoot me a PM and let me know.

I figure if I buy one I can loan it to the locals in Toronto and save them the trouble.

 

[sneakypete]

im down for renting or buying an aluminum one
-pete

 

[suprarich]

I will think on a price, prob be 4-450 in aluminum. I will have to dig up the water jet program.

 

[927mgtepat]

how much will you rent it for>?

When it is done, ill rent it out for $20.00 plus a $100 deposit that i will return, also you pay for shipping both ways.

 

[927mgtepat]

I'm going to make mine out of steel. It will be cut on a CNC mill already have the CAD program made.It will also be machined ground true. I also have a Block and head lapping plate which is also ground true.

 

[Sawbladz]

Rich: Since the torque plate is thinner than the head, do you use shorter bolts to torque it down with?

 

[7MsuprO]

I need to make about 10 or 20 of these and sell them.


This is pics of my titanium torque plate.
[thumb]http://img.photobucket.com/albums/v487/rich1969/rods130.jpg[/thumb]

What are those big holes in the head of your flathead I6???:sarcasm:

 

[spoolint78]

ron r has one.
perhaps you can ask him to borrow his.

 

[927mgtepat]

Ok, guys here are some teaser pictures of my Torque Plate. It goes to the machines tomorrow to get all the holes cut and drilled out. I'm making it for .60 over. Once I'm done with it I will be renting it out.

 

[7MsuprO]

nice!

 

[shaeff]

Ok, guys here are some teaser pictures of my Torque Plate. It goes to the machines tomorrow to get all the holes cut and drilled out. I'm making it for .60 over. Once I'm done with it I will be renting it out.

Why .60 over? Why not .40, since anything including and over that is making the block too weak, IMO.

 

[adampecush]

I need to make about 10 or 20 of these and sell them.


This is pics of my titanium torque plate.

seems like a bit of a waste of titanium...

 

[gofastgeorge]

Ok, guys here are some teaser pictures of my Torque Plate. It goes to the machines tomorrow to get all the holes cut and drilled out. I'm making it for .60 over. Once I'm done with it I will be renting it out.

Why not .080" over like they do in Japan?
I see a lot of old GTEs over there that there were no weakness issues with.....
HKS, JUN, and others make 85mm pistons + oversizes to do this.
I have a set of 85mm pistons made in Germany (probably for Blitz),
that I got out of Japan.
They refer to them as 3.1 liter pistons.

I like the Titanium idea,
shipping it back and forth would be a Lot Less !
Let me know when your going to start renting it,
I have a block to do.

 

[IJ.]

Lots of cheap Russian Ti on the market now just be sure to have it checked with a geiger counter

 

[suprarich]

Is that why it gives off heat Ian??

 

[IJ.]

Turn the lights off

 

[Piratetip]

Ha!