Swedish 1JZ swap, lots of detaling and pics

[SilverSupraT]

Looking great man! I like all the detailing work you did, very nice.

 

[RWHP]

Thanks man! Will be another 20-25 hours in the garage this coming weekend, have to polish the valvecovers, intake manifold, turbo pipes and so on

 

[RWHP]

Painted some vacumpipes that didnt look good

Shiny compressorhousings and the heat shield got sme hot paint on it

Another one done, got some more to do

My Supra and my friend's Supra that i'm building

 

[macjac69]

Looks good! The attention to detail is evident... keep the pics comin..

 

[RWHP]

Thanks Yep lots of pics is coming, hate project threads that has 1 pic for 4 pages!

 

[RWHP]

The shifterbushings is a bit tired, new ones ordered

Thought this looks different compared to other R154 gearboxes?

 

[suprastanger507mgte]

The shifterbushings is a bit tired, new ones ordered

Thought this looks different compared to other R154 gearboxes?

Looks like you had a short shifter on there? My C's had that aluminum base.
Nice clean up work man.

 

[RWHP]

Looks like you had a short shifter on there? My C's had that aluminum base.
Nice clean up work man.

Got no clue, how do i find that out? Would be awesome with a shortshifter :icon_bigg Take some pictures on the shifter and put it up so you guys can see.

 

[suprastanger507mgte]

Got no clue, how do i find that out? Would be awesome with a shortshifter :icon_bigg Take some pictures on the shifter and put it up so you guys can see.

Yeah im talking about the top round pice. ususally they are square. Thisis for a Supra right
Yeah the C's shifter is ussually Stainless steel as opposed to the stock ones which are painted black. Don't you have your shifter? Post pictures.

 

[RWHP]

Yeah im talking about the top round pice. ususally they are square. Thisis for a Supra right
Yeah the C's shifter is ussually Stainless steel as opposed to the stock ones which are painted black. Don't you have your shifter? Post pictures.

Looked at a picture on a C's shifter and it looks pretty much the same but i will take pictures on it so you can help me find out

 

[tlo86]

yeah does look like a short shifter, are you just running that one electric fan? the bushing didnt look that bad mine looked a bit worse hehe. 1 trip to marlin crawler fixed that though: D

 

[RWHP]

Got the last parts that where missing from Titan Motorsports, turbo timer harness and a Greddy Type-R bov. Order the last parts from HorsePowerFreaks to put the engine and tranny in the car, still have some parts to order and im waiting on the toyota dealer for my gaskets.

 

[RWHP]

Yesterday UPS droped a XTD stage 3 clutch kit on the garage door. It will do for now, maybe change the pressure plate when the horsepower is going up

 

[tlo86]

ack @ XTD

 

[OneJArpus]

did u read about the XTD clutches? look good other then that

 

[RWHP]

Yes I have read about the XTD clutch kit, but instead of reading what others have to say I know what its good for I used it on my old 400rwhp 7M MkIII and it worked fine for over 11000 miles There is also a guy in England uses a XTD chopper ceramic disc and he runs 10s at the 1/4 But we will see how its going!

Thanks anyway

 

[RWHP]

Finally got some things done Waiting for the last parts from HPF that will be sent tomorrow.


Got sponsored by ZL Workshop on a 2JZ waterpump that has gone 50 miles

Since the local Toyota dealer cant get OEM 1JZ parts unless I give them a part number many it will take some time to get those, but finally they arrived

New front mount intercooler that measures 500x300x76mm

Made place for Autometer oil pressure and boost where the stock gauges are mounted

All the polishing isnt the cleanest work as you can see haha

A friend mounted flywheel and clutch, ARP bolts for the flywheel

Ready to be lifted in place

After some minor work everything got in to place

 

[XofXtimeX]

Do I spy hockey pucks for motor mounts?

Used those on a friends LS1 240SX. Turned out pretty well if I remember correctly.

Great work so far man just keep it up! Insane attention to detail. Good job!!!

-Nick-

 

[RWHP]

Do I spy hockey pucks for motor mounts?

Used those on a friends LS1 240SX. Turned out pretty well if I remember correctly.

Great work so far man just keep it up! Insane attention to detail. Good job!!!

-Nick-

Haha yes Hockey pucks are underestimated! And new motor mounts costs around $1000 :aigo:

Thanks man

 

[RWHP]

Last parts

Pretty much everything done for a startup, got to fix a new starter since my is broken