well I did it again. bought my 4th Supra the other day, this one a '91 JZA70 Limited, black targa auto with shadow grey interior.
I picked it up from Japan Direct Motors in Columbia, SC and could not be happier with my experience with them.
Follow on IG: @yhatzee89
I supplied my own wheels/tires, steering wheel, exhaust, and intake as part of the sale. all of which I had sitting in my garage waiting on a car.
CURRENT MODIFICATIONS:
HKS intake
Polished cam covers
Blitz ECU
440cc injectors
ShaftMasters one piece aluminum drive shaft
LIPP Trac bars
HKS TEMS controller
TRD Momo steering wheel
Whiteline front sway bar
Recaro speed seats
Tenabe cat-back exhaust
Kenwood GPS head unit
Polished SVT Cobra wheels
TTR lip
LED dash conversion
TTR Recaro floor mats
AutoExtrude cup holder
LED dome lights
so I found the ad at about 02:00 am on Monday night, told my wife I was gonna go get it at 06:00, and finally got on the road to go get it at about 1:30.
(I got rid of the floor mats before I even left the lot)
got it home safe and sound and the work began:
Put my exhaust on
Update: 6/19/17
I've done some little things on the car since I got it
Like putting on my wheels
Only to realize they won't fit over the BenzBBK
(Wheels FS!!! Lol)
Also got a proper intake pipe/filter
And promptly polished it
Ripped out my beautiful seats
And replaced them with my Recaros
And my Recaro floor mats
Installed my HKS TEMS controller, GPS head unit, and cup holder from AutoExtrude
Installed my Whiteline sway bar, Lipp trac-bars, and aluminum 1pc DS
Repainted my front shroud
And added a front plate
That's it so far...
Update 7/19/17
Well I've narrowed down the no start issue to either the ECU or ignitor. I had the caps replaced in the ECU but it's still giving me code 14.
Also got myself some new wheels for $300 with decent tires, SVT Cobra. Polished the faces and painted the insets
Polished my cam covers
Even got a new decals
Converted the digital dash from KPH to MPH as well as upgrading to LEDs
I had to create a new speedo sensor wheel in order to get the cluster to read in miles instead of kilometers
All together. I think it came out really well
Upgraded a few other things to LEDs while I was at it
Rplaced the old lip with a TTR one that had to be repaired first
And even put on some new hood struts
I got one of those rediculous dash mats just to prevent cracking the dash
And sprayed all my column plastics with rubberized undercoating to deaden any hollow rattling sounds
UPDATE 7/6/17
Car is back up and running. Had to get a completely new ECU, ended up getting a Blitz ECU but it was tuned for 440s so I also had to swap injectors.
Took it for a drive today
...Until it rained
Just need to figure out how to get rid of these warning lights
I picked it up from Japan Direct Motors in Columbia, SC and could not be happier with my experience with them.
Follow on IG: @yhatzee89
I supplied my own wheels/tires, steering wheel, exhaust, and intake as part of the sale. all of which I had sitting in my garage waiting on a car.

CURRENT MODIFICATIONS:
HKS intake
Polished cam covers
Blitz ECU
440cc injectors
ShaftMasters one piece aluminum drive shaft
LIPP Trac bars
HKS TEMS controller
TRD Momo steering wheel
Whiteline front sway bar
Recaro speed seats
Tenabe cat-back exhaust
Kenwood GPS head unit
Polished SVT Cobra wheels
TTR lip
LED dash conversion
TTR Recaro floor mats
AutoExtrude cup holder
LED dome lights
so I found the ad at about 02:00 am on Monday night, told my wife I was gonna go get it at 06:00, and finally got on the road to go get it at about 1:30.




got it home safe and sound and the work began:


Put my exhaust on

Update: 6/19/17
I've done some little things on the car since I got it
Like putting on my wheels

Only to realize they won't fit over the BenzBBK

(Wheels FS!!! Lol)
Also got a proper intake pipe/filter

And promptly polished it

Ripped out my beautiful seats

And replaced them with my Recaros

And my Recaro floor mats

Installed my HKS TEMS controller, GPS head unit, and cup holder from AutoExtrude

Installed my Whiteline sway bar, Lipp trac-bars, and aluminum 1pc DS



Repainted my front shroud

And added a front plate

That's it so far...
Update 7/19/17
Well I've narrowed down the no start issue to either the ECU or ignitor. I had the caps replaced in the ECU but it's still giving me code 14.


Also got myself some new wheels for $300 with decent tires, SVT Cobra. Polished the faces and painted the insets






Polished my cam covers





Even got a new decals
Converted the digital dash from KPH to MPH as well as upgrading to LEDs



I had to create a new speedo sensor wheel in order to get the cluster to read in miles instead of kilometers


All together. I think it came out really well

Upgraded a few other things to LEDs while I was at it




Rplaced the old lip with a TTR one that had to be repaired first


And even put on some new hood struts



I got one of those rediculous dash mats just to prevent cracking the dash

And sprayed all my column plastics with rubberized undercoating to deaden any hollow rattling sounds

UPDATE 7/6/17
Car is back up and running. Had to get a completely new ECU, ended up getting a Blitz ECU but it was tuned for 440s so I also had to swap injectors.


Took it for a drive today

...Until it rained

Just need to figure out how to get rid of these warning lights

Last edited: