ok checked all fuses and jumped efi relay still no check engine light and replaced builb. so pulled key ignition wires witch were all hacket and slots 5 and 7 are making contact when in lock possion is this norm
Still no fire
- Thread starter JStoked
- Start date
Idk about the whole ignition aspect but
are your lights working? dash? windows? etc?
If so when you turn your key to acc i believe can you hear
your fuel pump kick on?
Re-check all your grounds.
Dont go straight to ignition.
Most likley your last thing to go out
unless you've messed with it before.
are your lights working? dash? windows? etc?
If so when you turn your key to acc i believe can you hear
your fuel pump kick on?
Re-check all your grounds.
Dont go straight to ignition.
Most likley your last thing to go out
unless you've messed with it before.
no no fuel pump i just got the car and just trying to get it started. all lights work BUT the check engine light windows even the seats still no fire
Its pretty simple, you need 12V on the BAT ECU pin, and 12V on the IGSW ECU pin along with good grounds to E1, E01, E02 and you should have a working MIL light. Check those with a voltmeter and let us know what you find.
mkiiichip;1593271 said:
all lights come on BUT the check engine
---------- Post added at 07:30 PM ---------- Previous post was at 07:29 PM ----------
ok i will try that thank you very much for the info will post what i find out
Ok checked the bat ecu pin nothing and nothing on the igsw ecu pin also grounds to e01 and e02 show resistance e1 is good
We have fire!!!! Had to jump the ignition ecu pin to the bat ecu pin but we have spark
had good ground to all 3 pins, but only 12v @ batt pin.
and the ign ecu fuse is good :/
had good ground to all 3 pins, but only 12v @ batt pin.
and the ign ecu fuse is good :/