no havent tried that with the pics im computer illiterate lol my roomate is going to help me out with it sometime... and im changin the turbo setup cause mine is some retarded like 1 of 300 japenese editions ever manufactured and i cant get replacement parts. ill get pics up so u can see. but im putting american setup (manifold, turbo, elbow, downpipe, ect) on it so its easier to modify later on
San antonio
- Thread starter Taco
- Start date
1 of 300 Japanese edition!? Who told you that? And what replacement parts were you trying to get? Is your car stock with the factory CT26? Do you have a 7m under that hood? I'd like to see this special edition stock turbo system you have. Along with the new "American setup" you're about to install. Before you undergo all that work let us see please. It sounds like someone is trying to pull the wool over your eyes.
no wool over the eyes that came from toyota they even sent diagrams and everything... we got pics once my friend gets some sleep we will try and get them on the computer.
The 60-1 on your 1J?
We need to all get together and check out this 1 in 300 limited edition turbo setup that came from the factory. Nicole... is this set up on a 7m engine? And what toyota dealership told you this?
We need to all get together and check out this 1 in 300 limited edition turbo setup that came from the factory. Nicole... is this set up on a 7m engine? And what toyota dealership told you this?
Yeah on my 1j. I'm not for sure but I think at times I hear the fins scraping the housing. It has in and out shaft play. I'll take it off tomorrow and check the exhaust fins. I contacted majestic turbochargers in Waco and got a quote for $335 for a rebuild.
i called germain toyota in columbus, ohio which is where the car was sold in 89 and they ran the vin. its on a stock 7m and im just tryin to put the ct26 setup on it so i know what the fuck im workin on, but i need the oil hard line that goes from the block to the turbo and the mounting plate that goes on the turbo. anyone got an extra or a place to look?
the 90 degree oil line that goes from the block to the turbo, where the line goes onto the block the plate is bolted on but where the line should go on the turbo there isnt the plate just two studs and open whole
nicole43105;1526797 said:
oil return line im guessing.
I NEED HELP
i am selling stuff on here and i have had two people say they have sent me money and i believe them.
im not sending anything out yet but i dont want to lose these costumers.
i gave them the right account e-mail but im not showing any money in it.
what could be the problem??? the account says unconfirmed but i have purchased with it before.
its all good i fixed it
Last edited:
Ok I got, it you need the coolent lines (on top of the turbo) and the oil lines (the one thats is on the bottom) I have the ones on the bottom for sure I'll have to check for the coolent lines. I'll let you know. I'm going down to San Antonio today I'll call you when I get down there.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=TC&P=9
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=TC&P=9
san supra;1526822 said:
WTF!? Is it halloween again? It usually takes a few days for money to be transfered when doing a transcation. Unless it's they're a premier account holder and money is coming from their account. Or something like that. When you see the moola, send off the parts. If they ask what the status is, just tell them you're waiting for paypal to confirm the transaction. They'll be patient.
thats fine if there welded or whatever but i do not have anything on the turbo to hook a line too, there was a rubber hose from the block to the other turbo but that will not sufice to the ct26 and there is nothing on the ct to put a line on thats the problem
nicole43105;1526903 said:
I didn't weld them thats the way they come. Are those the only hoses you need? Do you need the coolent lines on the top of the turbo? I have them both I'll call you around 8pm when I head back home. Where do you live? Are you the one that lives next to the forum?