Ryan's 92 build thread aka NashMan
- Thread starter NashMan
- Start date
well my mind has changed once again
i ditching the tail 50 mill bov i just don't want teh hassle of stuiped springs
so i going to buy the new hks raceing bov
so now i got to sell my 3 extra blitz ones and my 1 tail unit
i ditching the tail 50 mill bov i just don't want teh hassle of stuiped springs
so i going to buy the new hks raceing bov
so now i got to sell my 3 extra blitz ones and my 1 tail unit
well right now i starting to think of ways to run my accusump
for the frist part i was just going to tee one of my oil cooler lines but i thought of better place and i wonte need a vavle as much as if it was teed in the line's
on the 7m block there is plate that covers this hole under the oil filter
i am simple just going to weld a bung on to the plate drill a hole and i am done or tread(tap) the hole it's self and thread a fitting in
more on this whne i get to that point of my build
for the frist part i was just going to tee one of my oil cooler lines but i thought of better place and i wonte need a vavle as much as if it was teed in the line's
on the 7m block there is plate that covers this hole under the oil filter
i am simple just going to weld a bung on to the plate drill a hole and i am done or tread(tap) the hole it's self and thread a fitting in
more on this whne i get to that point of my build
well this week end i got around to doing some thing to the car
jack it up to the point were i cna pretty much sit under my car lol yes it is that high space is nice thing to have
well my lines are all conveted to none abs now and all cleaned up
found out my car does not have streering dampner i guess 92's didn't have them
work on my acumsump pluming the line right in the block so i don't have to use a one way cheak vavle pretty easy to amke and do
still got lots do just matter of time
and my dd is done now too
78 orange vw rabbit 1.6 liter of fuck you up the mouth
mods
momo wheel
momo shift nob
r15x7 works wheel's
NM side exit exhuast 4 inc boom tube lol
full polly (the hole car)
8 way blisten coil overs
biggest sway bars that i chould get front and rear
stainless lines
drilled rotors
rear disc convertion
bigger front disc convertion
rare ero sturt tower bares fornt and rear
best part stick's like gule stop's on a dime
68 hores power oh yae lol
now it's all supra the dd is doen and fun and can be auto xed and still do ok
iall post pics if you guys wana see
jack it up to the point were i cna pretty much sit under my car lol yes it is that high space is nice thing to have
well my lines are all conveted to none abs now and all cleaned up
found out my car does not have streering dampner i guess 92's didn't have them
work on my acumsump pluming the line right in the block so i don't have to use a one way cheak vavle pretty easy to amke and do
still got lots do just matter of time
and my dd is done now too
78 orange vw rabbit 1.6 liter of fuck you up the mouth
mods
momo wheel
momo shift nob
r15x7 works wheel's
NM side exit exhuast 4 inc boom tube lol
full polly (the hole car)
8 way blisten coil overs
biggest sway bars that i chould get front and rear
stainless lines
drilled rotors
rear disc convertion
bigger front disc convertion
rare ero sturt tower bares fornt and rear
best part stick's like gule stop's on a dime
68 hores power oh yae lol
now it's all supra the dd is doen and fun and can be auto xed and still do ok
iall post pics if you guys wana see
NashMan;1153909 said:
Yes, please.
And whats "full poly" the whole car?
Do you mean the stuff that stiffens the chassis?
Of course,:crazy1: It was late, lol.
I was thinking polyurathane foam. The stuff you inject into the chassis of unibody cars, but now that I think about it, it's probably not polyurathane at all. I'll go now::hang::
I was thinking polyurathane foam. The stuff you inject into the chassis of unibody cars, but now that I think about it, it's probably not polyurathane at all. I'll go now::hang::
well i have not really bean updateing this i have some new stuff i have added pic and progress to come
well it's bena some time but i have done some stuff
acusump is installed not wired yet
and my crazy pcv is done i might chnage it later wiht 2 catch cans but for now this will do tell i shoot for bigger boost like 30 pound's and out grow the system
next is ether fule system more line :1zhelp: kidna gettign sick of maken them and paying for them but there just so pretty
i may still chnage the t and tape new hole into the catch can but not sure yet frist off i don't have tap or drill biut that big and not sure if wana run it into my trubo pie or my exhaust
ps i got free line and fittign form my buddy cna you guess what one it is he has not a clue
acusump is installed not wired yet
and my crazy pcv is done i might chnage it later wiht 2 catch cans but for now this will do tell i shoot for bigger boost like 30 pound's and out grow the system
next is ether fule system more line :1zhelp: kidna gettign sick of maken them and paying for them but there just so pretty
i may still chnage the t and tape new hole into the catch can but not sure yet frist off i don't have tap or drill biut that big and not sure if wana run it into my trubo pie or my exhaust
ps i got free line and fittign form my buddy cna you guess what one it is he has not a clue
Attachments
umm power level 500 to 550 for now at about 20ish pounds mabey tad more or what ever i can get out of pump gas but again we will see
30 psi and race gas and no2 i think about 600 to 650 if i am lucky will it be on my 160 motor not sure i will be pulling the motor soo so i cna do good check up befor i even think that
30 psi and race gas and no2 i think about 600 to 650 if i am lucky will it be on my 160 motor not sure i will be pulling the motor soo so i cna do good check up befor i even think that
welll since i am on buject and kidna wana drive the car this summer i am not going to do stainless ic piping sinstead flat stain black still look good
hope to have my turbo clocked ic pipe's ran and fainly add in the last breaker for the alt relocation
and finsh my fuse box install aka simple bracket
pic's to come
hope to have my turbo clocked ic pipe's ran and fainly add in the last breaker for the alt relocation
and finsh my fuse box install aka simple bracket
pic's to come
here is the rough idea so far it just mocked up with tape ect
what you guys think ps i have to runt hat 90 bend but other then that there hardly no bend after that that just peac of pie i had lying around
edit the pipe will not be that high i still got to cut about 1 inc from my trubo if i decide to do it this way but it shortest and less bendy way of doing it
it the looks that i am looking at now
what you guys think ps i have to runt hat 90 bend but other then that there hardly no bend after that that just peac of pie i had lying around
edit the pipe will not be that high i still got to cut about 1 inc from my trubo if i decide to do it this way but it shortest and less bendy way of doing it
it the looks that i am looking at now
Attachments
Not a big fan of Periscope IC pipes but you're going to do it exactly how you have it in your head so what I think is irrelevant anyway 
really i wana rip out my hair cause i am not even a fan of it eather
but my power streeing junk is all in the way and will have to be re worked ): and its still close to the fire wall
so spend money for ti to look better and have short path as well
or deal with the ugly/diffent
but my power streeing junk is all in the way and will have to be re worked ): and its still close to the fire wall
so spend money for ti to look better and have short path as well
or deal with the ugly/diffent
IJ.;1242927 said:Not a big fan of Periscope IC pipes but you're going to do it exactly how you have it in your head so what I think is irrelevant anyway
Last edited: