So ive been able to start up my 7mgte swap a couple of times now but every time i try turning it on a second time it wont start.
i took out a spark plug and it was filthy black. This was on a new set of plugs running for only about 15min. Is it possible that im flooding the cylinders making it not able to start up again?
Mods are
walbro 255
500cc inj.
afpr at about 25psi
i took out a spark plug and it was filthy black. This was on a new set of plugs running for only about 15min. Is it possible that im flooding the cylinders making it not able to start up again?
Mods are
walbro 255
500cc inj.
afpr at about 25psi