Pictures of Titan Motorsports Pistons for the MKIII 7MGTE
- Thread starter bottle
- Start date
rakkasan;1001922 said:
Coating is not availble in our first release.
A lot of the 7mgte guys when we talked about it did not want to pay the extra money for this item.
If we get enough requests we can do that.
but they are 2jz so disregard.Top Ring : 1.00mm
2nd Ring: 1.2mm
Oil Ring: 2.8mm
2619 Alloy
It is using wire locks.
The pin is a standard 5100 steel pin with a .150 wall thickness
2nd Ring: 1.2mm
Oil Ring: 2.8mm
2619 Alloy
It is using wire locks.
The pin is a standard 5100 steel pin with a .150 wall thickness
Just curious... how do these compare to the other pistons that are available? JE? Ross? Probe?
From a consumer stand point whos looking to buy a set of forged pistons, whats your sales pitch to me to make me wanna buy them? besides the name...
From a consumer stand point whos looking to buy a set of forged pistons, whats your sales pitch to me to make me wanna buy them? besides the name...
WORD, especially when you can get a set of Ross forged pistons for less than $500. What the pricing lookin like??
All i've heard is bad things about ross... lol
i dont know if i woule even consider them if i was to buy pistons... but thats a totally different topic.
i dont know if i woule even consider them if i was to buy pistons... but thats a totally different topic.
bottle;1002147 said:
Don't forget, that these are also 9:1 compression. A Better than JE shelf piston in a custom type compression ratio for a bargin price. The inital run is 3 sets of STD, 3 sets of +.020, and 3 sets of +.040
If anyone wants the top and sides coated, an individual set can be done for the extra cost to send them back out.
Correct me if I am wrong Bottle, but the price will most likely go up after this initial 9 set run. I already have 2 or 3 sets spoken for, so if anyone would like a set of the initial run, just PM me.
aren't these reworked JE pistons? I thought I saw that some where posted? if so I have a set of JE's can I get them reworked or a trade in?
Stop comparing the off the shelf piston specs from company X v. a custom spec'd piston for the same company X. When custom spec'd. The pistons stop being the same! regardless if the SAME company was the one that did the off the shelf v. the custom spec.d piston.
Ross might be $500 for the off the shelf pistons but the custom spec'd ones start around $750. I should know!
Ross might be $500 for the off the shelf pistons but the custom spec'd ones start around $750. I should know!
Well thats what i want to know, what makes these so much better than what i have right now? NOBODY has answered that. All i see are specs and what not... My probe's are the same material as these, have the forced oilers, and all of that stuff...
WHY should i consider buying these pistons over my probe pistons? If you cant answer that for me, then im not even going to consider paying double for a piston thats the "custom".
WHY should i consider buying these pistons over my probe pistons? If you cant answer that for me, then im not even going to consider paying double for a piston thats the "custom".