Newgen's 2jzgte Swap
- Thread starter NewGen
- Start date
Mark (Mark1987supra) and I having a pow wow. Beautiful day in iowa can't wait to have the car running!
Some updated pics of the engine bay. Car is on the road and has a very conservative tune. Waiting for funds and time to have my tuner come down to actually tune the car.
Haha thanks andy! The part that bugs me is the heater hose pcv lines. Im still waiting on the braided stuff its taking way to long
No problem.
When you do get them try to run them a little higher and just make sure it wont touch the downpipe.
When you do get them try to run them a little higher and just make sure it wont touch the downpipe.
Absolutely beautiful build... I am in awe and you've inspired me to make my car that much better. Well done sir.
Thanks guys 
I'm hoping to have had a "good" turbo put on next spring get this crappy chinese one off lol.
I'm hoping to have had a "good" turbo put on next spring get this crappy chinese one off lol.
suprakidd;1836867 said:
My plans to get a garrett gt4276 for the car. I've had my sights set on her for awhile
Thanks for the kind words!
I've greatly neglectic my build thread. I will be working on getting it cleaned up in the next couple of days. Plans have changed with the car. I've almost sold the car twice wasn't happy with the way it was running at the track.
Current plans:
Th350 Trans
Shift Kit (for now)
ATF Trans addapter
3800RPM stall converter
Custom Trans Mount
Custom 3 inch drive shaft
B&M Trans cooler
Hurst Quarter Stick
GT4294 Turbo
Mac valve for the qsv
Ceramic coat turbo manifold
Retune on both 93 octane and 110 octane
Some type of rear wheel and stick/bias ply pending on budget.
Matt
Current plans:
Th350 Trans
Shift Kit (for now)
ATF Trans addapter
3800RPM stall converter
Custom Trans Mount
Custom 3 inch drive shaft
B&M Trans cooler
Hurst Quarter Stick
GT4294 Turbo
Mac valve for the qsv
Ceramic coat turbo manifold
Retune on both 93 octane and 110 octane
Some type of rear wheel and stick/bias ply pending on budget.
Matt
Really nicely done swap my pre 89 brother. Looking forward to a 10 sec time slip from the sound of things
Time for some updates peeps.
It was an extremely busy summer:
1st car show of the year. (This is just the group I came in with.)
Picture from my little brothers college grad party.
Yearly Ziebart car show. A few of us showed up early and helped out.
Later on lol.
Car on the dyno
http://www.facebook.com/photo.php?v=962737724179&set=t.554031071&type=3&theater
End of June we were getting ready to take our 1st trip to the track. I was out trying to figure out how to launch my car when out of the blue carnage out of no where!
At 1st thought I had broken the dif from the way the car was driving. I ended up dropping it 1st. My subframe was cracked so time to spend more money
What I started with out of my parts car
All cleaned up
Reassembled with energy suspension bushings and beech solid subframe spacers
Got the car back together and decided to put a 4.30 lsd I had lying around from my 87 n/a sport in the car. Drove the car for probably a month with no issues. Then My Aeromotive A1000 decided to fail.
Mach up of new fuel pump.
Weldon 2025
Got the car put back together just in time for the omaha ice cream cruise held by 1320 video
Vip baby
Picture taken by a Supramania member Salidad.
A private street race a few of us attended the
[video=youtube_share;kiCrZaA8f7c]http://youtu.be/kiCrZaA8f7c[/video]
One of the videos I was in
[video=youtube_share;IXAz_8geai4]http://youtu.be/IXAz_8geai4[/video]
Shortly after we got back we decided to hit a local 1/8th mile track. Here's a few videos of us running
[video=youtube_share;IVFmnK0fhbc]http://youtu.be/IVFmnK0fhbc[/video]
There was a fast four import event at the end were they take the 4 fastest imports and run them against each other. I took home the win :icon_bigg. Not extremely proud with the times I ran the car went 8.3 @ 92mph. Car just wouldn't hook with the tire i had. Also later found out the 4.30 lsd that was in the car was over spun and only putting power down to one wheel.
More engine bay shots:
Shortly after going to the track I was at my peak frustration with the car and ready to part with it. I put the car up forsale and found a guy in omaha who was interested in trading his FD rx7 for it. Long story short the car wasn't running he was working toward getting it running again finally after 3 month I decided to keep the car and got over my issue with having an automatic in the car.
Since then I've picked up these beauty's. I have yet to pick the matching door panels will be doing so at the beginning of Jan. There really dirty working to getting access to an extractor.
I put the 3.91 out of my car originally back in for now car hooks even on the street alot better. I weighed the car half tank of gas full interior including floor mats. It weighed 3580lbs 2 years ago. The car weighed in at 3440lbs really happy!
The car is currently hibernating in the garage. I need to get my v8 rx7 finished and liquidated 1st before I start on the supra again.
It was an extremely busy summer:
1st car show of the year. (This is just the group I came in with.)
Picture from my little brothers college grad party.
Yearly Ziebart car show. A few of us showed up early and helped out.
Later on lol.
Car on the dyno
http://www.facebook.com/photo.php?v=962737724179&set=t.554031071&type=3&theater
End of June we were getting ready to take our 1st trip to the track. I was out trying to figure out how to launch my car when out of the blue carnage out of no where!
At 1st thought I had broken the dif from the way the car was driving. I ended up dropping it 1st. My subframe was cracked so time to spend more money
What I started with out of my parts car
All cleaned up
Reassembled with energy suspension bushings and beech solid subframe spacers
Got the car back together and decided to put a 4.30 lsd I had lying around from my 87 n/a sport in the car. Drove the car for probably a month with no issues. Then My Aeromotive A1000 decided to fail.
Mach up of new fuel pump.
Weldon 2025
Got the car put back together just in time for the omaha ice cream cruise held by 1320 video
Vip baby
Picture taken by a Supramania member Salidad.
A private street race a few of us attended the
[video=youtube_share;kiCrZaA8f7c]http://youtu.be/kiCrZaA8f7c[/video]
One of the videos I was in
[video=youtube_share;IXAz_8geai4]http://youtu.be/IXAz_8geai4[/video]
Shortly after we got back we decided to hit a local 1/8th mile track. Here's a few videos of us running
[video=youtube_share;IVFmnK0fhbc]http://youtu.be/IVFmnK0fhbc[/video]
There was a fast four import event at the end were they take the 4 fastest imports and run them against each other. I took home the win :icon_bigg. Not extremely proud with the times I ran the car went 8.3 @ 92mph. Car just wouldn't hook with the tire i had. Also later found out the 4.30 lsd that was in the car was over spun and only putting power down to one wheel.
More engine bay shots:
Shortly after going to the track I was at my peak frustration with the car and ready to part with it. I put the car up forsale and found a guy in omaha who was interested in trading his FD rx7 for it. Long story short the car wasn't running he was working toward getting it running again finally after 3 month I decided to keep the car and got over my issue with having an automatic in the car.
Since then I've picked up these beauty's
. I have yet to pick the matching door panels will be doing so at the beginning of Jan. There really dirty working to getting access to an extractor.
I put the 3.91 out of my car originally back in for now car hooks even on the street alot better
. I weighed the car half tank of gas full interior including floor mats. It weighed 3580lbs 2 years ago. The car weighed in at 3440lbs really happy!The car is currently hibernating in the garage. I need to get my v8 rx7 finished and liquidated 1st before I start on the supra again.
You ever want to get rid of the recaro interior let me know. I had a complete set in my 91 including the door cards and loved it. Now you are making me miss my favorite car. Very nice.