newbie tuning help!!!!

[boosted2085]

i just installed maft pro in speed density mode..i got it used so i reset the setting as close as i could to stock...im new to tuning,im wanting to hit 320-350hp..if some one can send me what theyre setup is on maft pro(speed dens)itll get me in the right direction quicker..thanks...

look at my signature to see my mods to see what kind of set up i can do

 

[albo_bizak]

get the 550cc injectors and you should be close to 300hp with the setup you have right now.

 

[Steely]

with that setup and 550's he should be closer to 350 ish

 

[boosted2085]

Thanks but i should have been more specific...i was meaning tuning the maft pro setup...trying to get numbers

 

[shaeff]

NEVER use someone else's tune. Even if two motors are built identically, the tunes will not be the same. What works for someone else, could potentially burn up your motor.

 

[dumbo]

to reset the maft pro hold the two right keys before you turn the ignition to on. And continue to hold. It will completely reset the unit.

 

[sneakypete]

search in the piggyback section and you will find tons of info on setting up the maftpro. once you get your base tune in, you can start messing with the fuel if you feel comfortable. i recommend a laptop to take logs from the maftpro

 

[boosted2085]

well i reset the mp...so im at base settings..but now im getting a weird idle..when i rev it it hesistates..right now im at 40 on the regualtor with vac on so im rich..the hose that went originally to the intake hose from the iac valve is off since i just have filter on the turbo ,when i put my finger in it the motor dies.any ideas guys?

 

[boosted2085]

well now i got the car running decent,but the only problem now is when i put in drive the car bogs in the low rpms...i was getting cel51 but even after i got rid of the code it still bogs,ive changed the tps enrichment,decay, even afterstart

 

[mdr40z]

seems like drjonez helped some people with setup/tune issues