your bootlight not working could be the switch as it is part of the lock mecanism. mine broke and when i took the interior panel off i found the switch part had moved and so was always turned offsuprra_girl said:
need quick help.. int lights & door switches
- Thread starter suprra_girl
- Start date
i sold my euro turn signals to someone in the states as a deal to get me clear turn signals about 2 years ago lol... does anyone have a pic of the vanity mirror with a light in?HellsLegion said:
I bet you guys have a lighted drivers door lock bezel aswell.
the tewd has been on my site for a while now 
and i've made it into pdf format
www.supra.co.nz/tech.htm
jdm got lit drivers locks
the boot lock switch is working fine as i have it wired into the alarm in the event someone manages to get it open, altho unlikely haha
and i've made it into pdf format
www.supra.co.nz/tech.htm
jdm got lit drivers locks
the boot lock switch is working fine as i have it wired into the alarm in the event someone manages to get it open, altho unlikely haha
Yeah we have lighted bezels, lighted mirrors, fade-out lights when you close the door (courtesy lights), digital climate control and so on.
Luxo-mania.
No digital dash though. Oh well... Digital dash blows.
Luxo-mania.
No digital dash though. Oh well... Digital dash blows.
Hahahaha, and LOL @ the word 'boot', thats great :biglaugh:Jeff Lange said:
My dome lights dont light up either, but the red open indicators do. Gauge lights dont light, and climate control only lights when headlights are off.
I'll check the dome fuse first, then if thats good, take the small panel off the lights and check the ground?
And the fuse for gauge lights is fine, shoudl I take out the cluster and check everything out behind there?
-Justin
the other thing i noticed is that the little red picture of doors open is also missing on the dash... i really dunno how to fix this lol
oh and i saw where that intergration relay object is... what PITA to get to... and what should i do with it?
oh and i saw where that intergration relay object is... what PITA to get to... and what should i do with it?
Sounds like the Integration Relay is at fault. It controls all of that. Either that, or you've got a bad fuse/fusible link.
Have you checked for corrosion/missing hardware on the bolt/threads where the door switch grounds to the chassis? Sorry if this is a repeat. Eric
door switch to ground is now mint it did... have a bad ground but i fixed that bit
thanks for the tips
it did... have a bad ground but i fixed that bit thanks for the tips
supradan22 said:
The integration relay is on the back side of the j/b with the main fuse cluster in the driver's side kick panel.... it's a PITA to get at. Take out the driver's seat and remove the plastic kick panel.
Oh, and it's not a regular relay, by the way. See here:
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?Section=Main&Page=15
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?Section=Main&Page=15
only main interior lamps, door open lamps, ign barrel light and floor lights.
all other accessories go
all other accessories go