Okay my car had a timing issue a little bit ago and I fixed that, but now when I get on it, it does'nt have the get up and go it used to have what might be the problem????? I have an 87 7mge...
What do you have your timing set at?Big_Rob said:Okay my car had a timing issue a little bit ago and I fixed that, but now when I get on it, it does'nt have the get up and go it used to have what might be the problem????? I have an 87 7mge...
Why do you say he's probably not running as rich???Saavedro88 said:Lol... I intentionally put a "Timing Issue" in my car and it's the only reason it has ANY go... lol...
You're probably just not running it as rich as you used to be.
IJ. said:You are jumpering the diagnostic block when setting the static timing aren't you?
jetjock said:Jumpering T and E removes all timing control from the ECU's microprocessor and routes it through the backup chip instead. In other words ESA is disabled. Once timing is set and control handed back to the MPU timing should advance. Also, it's not possible to set initial timing if IDL is open. If a code 51 is present you're wasting your time so to speak...