Master Power Turbos

[MDCmotorsports]

Well I officially got the invite to become a dealer for these guys.

The turbos are made in South America, with parts from Germany.

The turbos are top notch stuff, and with really cheap prices.

If I did a group buy, who would want what and how many?

See this website for the turbos listed....

http://www.masterpower.com.br/eng_produtos_automotivo.htm

Let me know what you guys think..

Just to give you an idea on price... a super 62-1 with a .68 or .84 a/r rear housing is only $720 new in the box.

 

[Slow Poopra 7MGTE]

good turbos i run a 60 trim and the 70 i was trying to sell was made by them to, really well built

 

[mkIIIman089]

hmm interesting. Tho I'd still need a manifold and everything for it.

 

[Idealsupra]

isnt master power the same as xspower et al?

 

[MDCmotorsports]

No they are not the same thing. IIRC XS power gets all of Master Power turbo's "throw away" turbos.

 

[empera]

damn, nice fuckin price...are these direct bolt on? or....sorry im not good wit turbos

 

[MDCmotorsports]

Not bolt on, but with a cheap-o ebay turbo header, you could have a super 62-1 with an internal waste gate that will flow 600hp.



And only for $700 NEW.

 

[empera]

hmmm...interesting....

 

[z1turbo]

Can you get the exhaut bolts and clamp to hold the exhaust housing to the center cargrig? Cause i have had one of these guy's t60 turbo's for a while now and i can install it because my buddy lost one clamp for the exhaust housing when i was reclocking it.

 

[MDCmotorsports]

Can you get the exhaut bolts and clamp to hold the exhaust housing to the center cargrig? Cause i have had one of these guy's t60 turbo's for a while now and i can install it because my buddy lost one clamp for the exhaust housing when i was reclocking it.

Give me some dimentions and I can get you just about any clamp for ANY turbo...

 

[Reign_Maker]

*drools* I was thinking master Power was made by Garret? yes?

Anyway, group buy eh? see what you can put together, I might go with something... Instead of upgrading my t60-1 maybe I'll just get a new one...

 

[Slow Poopra 7MGTE]

master power turbos have garret turbines, bearings and replica exaust housings, and there own MP compressor housings i did research before i bought my t70, i had alot of trouble selling it because its a fairly new company and everyone swore up and down it was a "xs power or ss autochrome" turbocharger. alot of dsm guys use them and mostly muscle car, like i said built good and def worth the cash

 

[MDCmotorsports]

*drools* I was thinking master Power was made by Garret? yes?

Anyway, group buy eh? see what you can put together, I might go with something... Instead of upgrading my t60-1 maybe I'll just get a new one...

That would be awesome for every one, including me.

What turbo would the group buy be for?

 

[JBatt87T]

I am definately intrested I just cant really read which ones they have on that website.

 

[catback]

i'm defenitely interested.
i was looking at the boss 550.
but at this price :evil2:

 

[Slow Poopra 7MGTE]

if you guys go to joels website to, www.forcedfab.com you can see some of the turbos, 57 trim, 60trim, 62-1, t70

 

[Reign_Maker]

OMG! I want a T70! Seriously... set me up... 70 cold side, 68 hot side, 69.11mm compressor, 64.5mm turbine... What's the spool like on that thing? Where can I find out the stats on it, like boost ability and flow rate? I was thinking about putting a 67mm compressor wheel, but a 69.4mmm will do JUST fine! But before I dump my T60-1, I wanna make sure this turbo will allow me to reach my goal: 500hp+...

 

[catback]

i'm also interested in something that could push around 500hp
w/supporting mods ofcourse.
something that kicks in nicely @around 3k.
all i know is my 62-1 upgrade just bit the bucket after 3000kms!!

 

[IJ.]

What's the spool like on that thing?

ReignMaker to engine room "give me boost" Engine room to Reign "Boost will be there in 3.5 hours Sir!"

3 Litres and a T-70 is a big ask for a street car.

 

[aljordan]

i'm also interested in something that could push around 500hp
w/supporting mods ofcourse.
something that kicks in nicely @around 3k.
all i know is my 62-1 upgrade just bit the bucket after 3000kms!!

Not gonna find that with 500 WHEEL hp. A TS04 is about as "small" as you can go and see 500 to the wheels. Spool is about 1k rpms later as well. Could possibly help out that spool with an AEM, but you're getting into other things at that point.