just joined the 1uz club
- Thread starter 4U2QUIK
- Start date
Did you check the stretch of your rod bolts? The threads need a few installs to ease up for accurate torque value lolz
Read the very last 4 sentences on this page:
http://arp-bolts.com/pages/technical_installation.shtml
I'm just teasin, a bit jealous you don't have to break in your upgraded car actually
-Dave
Read the very last 4 sentences on this page:
http://arp-bolts.com/pages/technical_installation.shtml
I'm just teasin, a bit jealous you don't have to break in your upgraded car actually
-Dave
chasis had a dead short somewhere.... it was the last straw, I finally decided the car was cursed. So I sawzalled it into about 20 pieces and put it in the scrap bin at work. didn't hurt that a chasis that was in way better condition practically fell into my lap
Sure beats a used 7m lol...
thedave925;1624104 said:Did you check the stretch of your rod bolts? The threads need a few installs to ease up for accurate torque value lolz
Read the very last 4 sentences on this page:
http://arp-bolts.com/pages/technical_installation.shtml
I'm just teasin, a bit jealous you don't have to break in your upgraded car actually
-Dave
Sure beats a used 7m lol...
you coulda made money on scrap metal, doh!
and props on a good chassis, a good deal is always welcome
as for the 'used 7m', that seems redundant when everything about my 7m is new.
Or is this about a used 7m your getting away from? I feel option 2 is more likely since I'm unclear on your supra history atm.
Is there any chance your going to attend SILV this year?
and props on a good chassis, a good deal is always welcome
as for the 'used 7m', that seems redundant when everything about my 7m is new.
Or is this about a used 7m your getting away from? I feel option 2 is more likely since I'm unclear on your supra history atm.
Is there any chance your going to attend SILV this year?
Who said I didn't make some money from the scrap
I was generalizing about the ole 7m, and yes I already have a room booked for the luxor. My exaust will be done tonight, and I'll be test driving it untill the 13th when I drive up if everyhing goes as planned.
I was generalizing about the ole 7m, and yes I already have a room booked for the luxor. My exaust will be done tonight, and I'll be test driving it untill the 13th when I drive up if everyhing goes as planned.
Sweet deal!
Ironically, I bought a car I knew I had to work on so I would know how to work on cars lol May you receive years of reliability from your 'yota v8
ATM there's no way I'm in circumstances to comfortably say I can go to SILV and enjoy myself for this year's run. But next year I'll go, tired of putting it off. So more power to ya!!
Ironically, I bought a car I knew I had to work on so I would know how to work on cars lol May you receive years of reliability from your 'yota v8
ATM there's no way I'm in circumstances to comfortably say I can go to SILV and enjoy myself for this year's run. But next year I'll go, tired of putting it off. So more power to ya!!
totally off subject, but...hubcentric wheel spacer? if you can find the spacers, I can make them hubcentric for you lol.
lol sure that'd be cool.
My fronts are tucked in a bit much and I know spacers would do wonders to the appearance....
Yes I'll take you up on the offer when I get the spacers.
New or not, if they need to be chamfered or whatever, I'll bring'em to ya, with some kick back for your time.
I totally wish I could do SILV lol, but theres a Supra I've gotta help transport, gotta follow the $$$
Best of luck with your Supe!
My fronts are tucked in a bit much and I know spacers would do wonders to the appearance....
Yes I'll take you up on the offer when I get the spacers.
New or not, if they need to be chamfered or whatever, I'll bring'em to ya, with some kick back for your time.
I totally wish I could do SILV lol, but theres a Supra I've gotta help transport, gotta follow the $$$
Best of luck with your Supe!
Absolutely DO NOT REUSE THE OLD BOLTS! use ARP 4AG Bolts instead.
CUSTOM SS EXAUST BY DAFT INNOVATIONS
---------- Post added at 05:47 PM ---------- Previous post was at 05:47 PM ----------
---------- Post added at 05:57 PM ---------- Previous post was at 05:47 PM ----------
CUSTOM SS EXAUST BY DAFT INNOVATIONS
---------- Post added at 05:47 PM ---------- Previous post was at 05:47 PM ----------
---------- Post added at 05:57 PM ---------- Previous post was at 05:47 PM ----------
Exhaust looks great! What are you planning for thermal protection on the fuel lines and speedo cable?
I got some sleeves from Thermo-Tec at Summit for the fuel lines and speedo cable, A LOT of heat gets pent up there.
Also, I'm curious why you left the factory tranny cross-member behind.
I got some sleeves from Thermo-Tec at Summit for the fuel lines and speedo cable, A LOT of heat gets pent up there.
Also, I'm curious why you left the factory tranny cross-member behind.
^^^ He meant use the ARP 4AG bolts for fastening to the crank. They're a tad shorter than the 7m bolts, can't really bottom out short bolts
if you don't use the sleeve/spacer, your swap will not work. specifically your starter.
thedave925;1627318 said:^^^ He meant use the ARP 4AG bolts for fastening to the crank. They're a tad shorter than the 7m bolts, can't really bottom out short bolts