hey i have a 89 supra turbo..im new to turbo cars dont noe mucht about then,anyways im drive my supra which is completed syock n i dont now if the turbo is spoolin correctly because the gauge of the tubo move just alil it stayin under 0 ..How do i noe is my turbo workin right?
im new to supra.but i always wanna 1
- Thread starter dtpBrugal
- Start date
Are you just revving it and not moving, because the turbo won't spool unless there is a load on the motor.
look at the vacuum line going into the boost pressure sensor on the driver side fender, mine had popped of and wouldnt give a reading....obviously
So its telling you you have lights out or none functioning lights, ok
So when you start the car, obviously you hear sucking noise, but do you hear any whistling type noises?
So when you start the car, obviously you hear sucking noise, but do you hear any whistling type noises?
I would also wonder if the gauge itself is working... but yea check your vacuum line going to the boost sensor, if its hooked up and the line looks good, then see if you can borrow a friends boost gauge, and see if that one works.
wow if this guy has firefox, it must be littered with spelling correction lines.... fml ill bet you either have:
1: major boost leak
2:clogged cat
3:blown turbo
4:very cracked wastegate
1: major boost leak
2:clogged cat
3:blown turbo
4:very cracked wastegate