So after getting out of Supras for a few different reasons, mostly boredom lol, I decided to buy a 1st Gen GS300 and stick a 2jzgte in it. Apart from buying the motorset, everything else was pretty much leftovers or things I wanted to do to the Supra but never did.
Here goes : I'll just cut and paste from club Lexus :
The car :
Now I am moving on to the GS300:
The car:
The Engine Replacement:
The Turbo replacement : These are home made KKK26 turbos from the Porsche 944. :biglaugh: and are welded onto the stock 2jzgte manifold.
Two tial 38 mm wastegate and routed back into individual downpipes running off the turbos.
Valve covers stripped :
Turbo cleaned and painted :
Valve covers : Painting in progress
Super simple wiring harness work. All it needs is to be extended about 20 inches wirte for wire. No pinning needed. A lot easier than MKIII swaps.
Here goes : I'll just cut and paste from club Lexus :
The car :
Now I am moving on to the GS300:
The car:
The Engine Replacement:
The Turbo replacement : These are home made KKK26 turbos from the Porsche 944. :biglaugh: and are welded onto the stock 2jzgte manifold.
Two tial 38 mm wastegate and routed back into individual downpipes running off the turbos.
Valve covers stripped :
Turbo cleaned and painted :
Valve covers : Painting in progress
Super simple wiring harness work. All it needs is to be extended about 20 inches wirte for wire. No pinning needed. A lot easier than MKIII swaps.
Looks ten times better now : 
